0.7.3-dev
Posted by gtg252b
|
Re: 0.7.3-dev May 08, 2012 09:27PM |
Registered: 12 years ago Posts: 1,611 |
|
Re: 0.7.3-dev May 09, 2012 10:49AM |
Registered: 11 years ago Posts: 58 |
I'm back to 0.7.2b for the moment because I was having some memory/stability issues with 0.7.3-dev. I can describe it quickly though: he's added a tab that lets you import multiple files to slice. These parts then show up in a preview pane where you can drag them around and re-position them. It's very slick... once he gets the stability issues nailed down, it's going to be a big upgrade over 0.7.2.
|
Re: 0.7.3-dev May 10, 2012 02:14AM |
Registered: 12 years ago Posts: 62 |
|
Re: 0.7.3-dev May 12, 2012 02:47PM |
Registered: 11 years ago Posts: 10 |
|
Re: 0.7.3-dev May 14, 2012 12:14PM |
Registered: 11 years ago Posts: 58 |
|
Re: 0.7.3-dev May 15, 2012 10:52AM |
Registered: 11 years ago Posts: 11 |
|
Re: 0.7.3-dev May 15, 2012 11:05AM |
Admin Registered: 12 years ago Posts: 2,569 |
You can pick the latest development version from [github.com] - I have no idea if it's usable as is or if you need some sort of compilation done.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: 0.7.3-dev May 15, 2012 01:17PM |
Registered: 11 years ago Posts: 58 |
The dev made a good write up on installing slic3r from git. Just remember that you're getting a developmental version... mileage may vary.
[github.com]
kburgess Wrote:
-------------------------------------------------------
> Can we get it to try? I just need to print one
> part that must be rotated first...
> Thanks,
> Ken
[github.com]
kburgess Wrote:
-------------------------------------------------------
> Can we get it to try? I just need to print one
> part that must be rotated first...
> Thanks,
> Ken
Sorry, only registered users may post in this forum.