[Slic3r 0.8.4] Perimeter of 1 = 2?

Other then Perimeter of 1, are there any other settings for single perimeters in Slic3r (0.8.4)?

With this Perimeter set to 1, it will still put 2. Set to 0, results in actually 0. I thought maybe the Fill Pattern makes a perimeter like line, but 0% fill density still has 2 perimeter lines.

Anyways, can't find any other mentions of this, so apologies if this has already been covered.

Will be trying the latest version soon anyways. EDIT: nevermind, didn't realise I was.

Cheers

Peter

Edited 2 time(s). Last edit at 07/01/2012 02:57AM by plamari.

Ok found it:

Under Advanced tab, in the other section, untick 'Generate extra perimeters when needed:".

Thank You! I was about to ask the same question

Does someone know if this this option also available from command line?! I haven't found it doucmented..

scuba, it's --extra-perimeters (or --no-extra-perimeters to disable the feature).

Hi sound! Thanks for that hint!!
--no-extra-perimeters does the trick!!!!
I've tried varios combinations of "--extra-perimeters" befor but that doesn't seem to work for me (Slicer0.8.4; Command: slic3r-console.exe --nozzle-diameter 0.5 --extra-perimeters -o ...)