slic3r 1.0.0 no more blobs

I'm very pleasd by the new version
the print quality is realy improved without changing anything in configuration

my prints are as smooth as a baby skin instead of an acneic teenager

well done !

so far not big pb found , test going on

This is the opposite of me,
What is the printer you use (Extruder)

Is it possible to have the config file?

extruder i jhead 0.4 mm abs 245° prusa 2 wade extruder

i've got that in the gcode file:
; generated by Slic3r 1.0.0RC1 on 2013-11-21 at 15:55:31

; layer_height = 0.1
; perimeters = 4
; top_solid_layers = 6
; bottom_solid_layers = 6
; fill_density = 0.15
; perimeter_speed = 60
; infill_speed = 60
; travel_speed = 130
; nozzle_diameter = 0.4
; filament_diameter = 3
; extrusion_multiplier = 1
; perimeters extrusion width = 0.50mm
; infill extrusion width = 0.50mm
; solid infill extrusion width = 0.50mm
; top infill extrusion width = 0.50mm
; support material extrusion width = 0.50mm
; first layer extrusion width = 0.50mm