Motors off?

First thing I would like to say it (again) Thanks for your hard work on this host/firmware... Its by far the best!!!!
now to the question:

When I add the motors off command to the end of my parts it does not seem to work in repetier for some reason.
It works fine in pronterface... any thoughts? I use the auto-fan code in sprinter and would really like to get the "all motors off command" to work for repetier.
Thanks!!!!!

Do you have "Go to dispose area" in your printer config in host enabled? If yes, this move is done after your end-Code which reenables the motors. I should really add a motor off button there, too:-)

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!

repetier Wrote:
-------------------------------------------------------
> Do you have "Go to dispose area" in your printer
> config in host enabled? If yes, this move is done
> after your end-Code which reenables the motors. I
> should really add a motor off button there, too:-)


Yes i did. Thanks!!!

motor off would be great!
also it would be cool to have an option to NOT add these line to the gcode... (pretty please????)
M104 S200 ; set temperature
M109 S200 ; wait for temperature to be reached

DanielG Wrote:
-------------------------------------------------------
> repetier Wrote:
> --------------------------------------------------
> -----

> motor off would be great!
> also it would be cool to have an option to NOT add
> these line to the gcode... (pretty please????)
> M104 S200 ; set temperature
> M109 S200 ; wait for temperature to be reached

The host doesn't add this. Slic3r adds this to the G-Code it produces, but that is not my program. I only include it for a faster setup.

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!

Yes, My bad ... I'll yap at sound.... (I knew that dunno why I asked...) )
Thanks for the lightening fast help!