Repetier Host Skeinforge No visualisation Gcode

Hello,
It seems I'm the first with this problem.
When I slice with Skeinforge, slicing and Gcode are Ok but I can't visualise the result like with Slic3r
It asked me to download Tkinter. I try different Python's version
If somebody is inspired ???
and sorry for my poor english
Thanks
Pierrick

Don't worry about the tkinter warning during slicing. It is not needed for slicing.

Your problem is that you didn't enable the Dimension module in Skeinforge and therefore you get no extrusion. If you enable travel moves preview you should see your model contains only from travel no moves and no G1 command has a Exxx value.

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!

Thanks You very much Repetier, so easy... but not for me!
I spent few hours on it and more and more to search the Slic3r settings (non Ascii character in my name session)
I begin in the Reprap world and I appreciate Repetier Host and Slic3r....maybe soon Skeinforge.
I should extrude my first centimeters of PLA this afternoon....
I would like thank you greatly to allow anonymous neophytes like me to access this domain.

Many thanks again ...

Pierrick