Screen setup Windows
December 18, 2013 08:29AM
Repetier Host 090C - Win7/64bit
My screen setup in Repetier Host is lost if I enter max view in windows and exit program, but remembered if exit in min mode.
So if I have log displayed beneath object it is remembered in min mode after exit but not in max mode.
Is that a windows feature or could it be better?
Re: Screen setup Windows
December 18, 2013 09:34AM
Looks like it assigned the position before windows was ready maximizing the window. New 0.95 version should have fixed it now.


Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!
Re: Screen setup Windows
December 18, 2013 09:54AM
Great!
I am still amazed by your fast response time to recognized issues.thumbs up

I have installed v0.95 immediately and "problem" is solved, thankyou.
I am looking forward to find out any other improvements in this version, exciting and thankyou again for a great program that makes 3d printing funny.

Maybe I have forgot, but where do you hide current version number of RepetierHost?

Edited 1 time(s). Last edit at 12/18/2013 10:21AM by justcurious.
Re: Screen setup Windows
December 18, 2013 10:24AM
It is in your title bar.


Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!
Re: Screen setup Windows
December 18, 2013 10:39AM
bum-bum...of course..thankyou.

Fine new switchable temperature graphs, but no graph data is shown for heater output on my setup..
Re: Screen setup Windows
December 18, 2013 10:42AM
The firmwares do not output heater output so I can not show it.


Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!
Re: Screen setup Windows
December 18, 2013 11:01AM
Marlin does!
return message in log from M105 acknowledge contains temperature and heater output for bed and extruder, but I am not sure of the validity as it reports 127 for max on both channels, should be 255.
I could send the log but did not find this info in logfile..
Sorry, only registered users may post in this forum.

Click here to login