Hey everyone,
I am running Repetier 1.5.5 on Win8 with Repetier firmware 0.92 and a rumba board and I quite often get an error during print. The printer stops its movements completely for maybe one second and than continuous as nothing happened. This stop sometimes accurs after a couple of layers, sometimes after 2h and sometimes a complete 6h print is error free.
It seems the freeze is caused by a printer reset:
23:51:22.121 : ok 16582
23:51:22.123 : N16587 G1 X72.061 Y46.307 E6.0774 *121
23:51:22.124 : N16588 G1 X72.504 Y46.336 E6.08671 F900 *17
23:51:22.223 : ok 16583
23:51:22.227 : N16589 G1 X74.011 Y46.636 E6.11899 *77
23:51:22.326 : ok 16584
23:51:22.326 : N16590 G1 X75.466 Y47.13 E6.15127 *120
23:51:23.486 : Printer reset detected - initalizing
23:51:23.486 : start
23:51:23.487 : Info:External Reset
23:51:23.496 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
23:51:23.498 : Free RAM:4428
23:51:23.581 : FlowMultiply:100
23:51:24.018 : N1 M110 *2
23:51:24.018 : N2 M115 *4
23:51:24.125 : N3 M105 *4
23:51:24.684 : N4 M111 S6 *67
23:51:24.685 : N5 T0 *31
23:51:24.685 : N6 M20 *55
10:49:01.974 : N3571 G1 X128.783 Y27.186 E121.9692 *121
10:49:02.474 : ok 3566
10:49:02.474 : N3572 M105 *52
10:49:02.474 : N3573 G1 X129.461 Y27.186 E121.9835 *118
10:49:02.505 : ok 3567
10:49:02.505 : N3574 G1 X145.393 Y11.254 E122.4567 *124
10:49:03.661 : Printer reset detected - initalizing
10:49:03.661 : start
10:49:03.661 : Info:External Reset
10:49:03.677 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
10:49:03.677 : Free RAM:5191
10:49:03.771 : FlowMultiply:100
10:49:04.208 : N1 M110 *2
10:49:04.208 : N2 M115 *4
10:49:04.208 : ok
10:49:04.208 : ok 2
10:49:04.864 : FIRMWARE_NAME:Repetier_0.92.3 FIRMWARE_URL:[github.com] PROTOCOL_VERSION:1.0 MACHINE_TYPE:Core_XY EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
10:49:04.864 : N3 M111 S6 *68
10:49:04.864 : Printed filament:0.00m Printing time:0 days 0 hours 0 min
10:49:04.880 : N4 T0 *30
10:49:04.880 : N5 M20 *52
10:49:04.880 : N6 M220 S130 *68
10:49:04.880 : N7 M221 S100 *71
10:49:04.880 : N8 M111 S6 *79
10:49:04.880 : N9 T0 *19
10:49:04.880 : N10 M80 *10
10:49:04.880 : ok 3
What could probably cause
Printer reset detected - initalizing? What should I look out for?
Edited 2 time(s). Last edit at 09/01/2015 05:08AM by 4Stroke.
Ein Schlosser ohne Hammer ist ein Jammer, ein Schlosser ohne Feile geht 'ne Weile