Welcome! Log In Create A New Profile

Advanced

Repetier crashes after every slic3r run

Posted by jimmyvinnie 
Repetier crashes after every slic3r run
February 15, 2016 11:46AM
Hi

Having problems with Repetier. After upgrading to the latest version (V1.6.1) 95% of the time I run slicer with slic3r and Repetier crashes. I have tried reverting back to the older version but that does the same. Have you any experience of this happening before? Could it be slic3r not Repetier?
Any hep appreciated. Please let me know if you need additional info or screen shots.

Jamie
Re: Repetier crashes after every slic3r run
February 20, 2016 12:18PM
What is the reported crash reason. Eventually needs to check windows events to find the message if it does not show up directly.

One reason could be low memory, but other reasons are possible.


Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!
Re: Repetier crashes after every slic3r run
March 14, 2016 07:12PM
Most likely one of the settings in slic3 is out of range a missing % sign look under speed or advanced . I had my solid infill at 100 and forgot % it though 100 mm giving me an error
Sorry, only registered users may post in this forum.

Click here to login