Welcome! Log In Create A New Profile

Advanced

G32 Fatal Error & M999

Posted by Flyer2 
G32 Fatal Error & M999
June 15, 2019 07:52PM
I've searched the internet and can't find any information on my issue.
My printers piezo Z probe and bed leveling have been working fine. The printer sat unused for a month. When I started Rep Host I was prompted for the latest update which I did. After updating I loaded a G code and immediately started getting the following fatal error: ".fatal; G32 leveling failed! Printer stopped and heaters disabled due to this error. Fix error and restart with M999". The printer runs through it's normal startup by heating the bed and extruder, homing and completes its first probe at the home position. As-soon-as it travels to the second probe position it stops and returns to home (doesn't start a probe}..Again, no changes have been made to anything including firmware, eeprom, anything. When I send G32 S2 from the host or server the leveling sequence works fine.
I can usually figure these things out but this has me baffled.

Appreciate any help-
Sorry, only registered users may post in this forum.

Click here to login