buZz's Tantillus build - Metric
June 24, 2012 12:36PM
Might as well just start a topic to gather stuff for my build smiling smiley

Printing the case now from cheapass yellow chinese filament ( 20 euro a kilo )

I will be sourcing all metric parts, as Sublime suggested. He is going to remodel two parts (i think?) towards metric, and i will be sourcing some 8mm rods with tolerances to fit inside a 608 bearing, which should be all thats needed...

Picture included smiling smiley
Attachments:
open | download - 3044.jpg (65.4 KB)
Re: buZz's Tantillus build - Metric
June 24, 2012 12:39PM
Oh yeah, I'm also streaming most of the printing on [bambuser.com] so I can walk away and see when done to go and start a new part winking smiley
Re: buZz's Tantillus build - Metric
June 24, 2012 05:05PM
And another part is done ..
Attachments:
open | download - 3045.jpg (64.6 KB)
Re: buZz's Tantillus build - Metric
June 24, 2012 08:52PM
aaaand another one!
Attachments:
open | download - 3049.jpg (60.1 KB)
Re: buZz's Tantillus build - Metric
June 24, 2012 11:54PM
Well done that is some fast printing. Please let us know how long it takes and how much material you use.

I should have those parts remodelled by the 4th of July.


FFF Settings Calculator Gcode post processors Geometric Object Deposition Tool Blog
Tantillus.org Mini Printable Lathe How NOT to install a Pololu driver
Re: buZz's Tantillus build - Metric
June 25, 2012 10:24AM
And the last part of the frame was completed somewhere last night ...
Attachments:
open | download - 3051.jpg (68.9 KB)
Re: buZz's Tantillus build - Metric
June 25, 2012 06:16PM
Re: buZz's Tantillus build - Metric
June 26, 2012 03:19AM
The smallness is one of my main motivations for building it winking smiley

I need a printer to carry along camping this summer (and maybe next one) to nerdevents, probably on bike winking smiley
Re: buZz's Tantillus build - Metric
July 04, 2012 08:33PM
Re: buZz's Tantillus build - Metric
July 04, 2012 09:09PM
I have also added the Z-lift bracket for a 6mm threaded rod lead screw. Please note it is untested and may be the wrong size as the metrics page you linked to specified two different sizes available for each bolt size.

The large gears should already be the correct size as Triffid Hunter modelled them for 8mm nuts.


FFF Settings Calculator Gcode post processors Geometric Object Deposition Tool Blog
Tantillus.org Mini Printable Lathe How NOT to install a Pololu driver
Re: buZz's Tantillus build - Metric
July 05, 2012 03:01PM
Thanks a lot smiling smiley

Now to get arcol to do my bidding winking smiley
Sorry, only registered users may post in this forum.

Click here to login