Welcome! Log In Create A New Profile


build a Fodarap

build a Fodarap
January 08, 2014 08:25AM
Hello everyone and Happy New Year, I would like to build a foldarap 1.1, I'm documenting to build one. Let me know if you can use the ramps 1.4 for electronics?
Re: build a Fodarap
January 09, 2014 09:33AM
I think you can use the electronics what you want, but its total height may not exceed 4.5cm if you want to put it inside the base frame (or maybe a bit more if you put it in the middle of the underplate between the smooth rods.)
Re: build a Fodarap
February 04, 2014 04:29PM
I've seen some Foldarap with a RAMPS, smaller board are easier to fit in the base but it's also possible smiling smiley
Re: build a Fodarap
March 01, 2014 04:35PM

I have been using a RAMPS (a friend lent me) for some time and you can integrate it in the Foldarap. You have to bore additional holes in the bottom plate to secure it, but basically there is no problem.


Edited 1 time(s). Last edit at 03/01/2014 04:35PM by JeromePS.
Sorry, only registered users may post in this forum.

Click here to login