VDX
RepRap magazine: issue #1
February 12, 2013 05:42PM
Hello all,

we are planning to start a magazine dedicated to RepRap in general and changing special highlights.

This forum can help to accumulate ideas and themes and show the interests and needs of the community ...

Edited 2 time(s). Last edit at 02/22/2013 04:49AM by VDX.


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: Coming soon - RepRap magazine: issue #1
February 13, 2013 06:37AM
For the love of god can someone do an article, or series of articles on skeinforge? From the basics to advanced usage. That would be #1 on my list.


- akhlut

Just remember - Iterate, Iterate, Iterate!

[myhomelessmind.blogspot.com]
Re: Coming soon - RepRap magazine: issue #1
February 13, 2013 11:38AM
I will be taking care of doing a Skeinforge article. It will be in issue two.


Help improve the RepRap wiki!
Just click "Edit" in the top-right corner of the page and start typing.
Anyone can edit the wiki!
Re: Coming soon - RepRap magazine: issue #1
February 14, 2013 12:58AM
// in a Mr Burns voice

Excellent.

Happy with slic3r, but want more tools in my bag o' tricks.


- akhlut

Just remember - Iterate, Iterate, Iterate!

[myhomelessmind.blogspot.com]
Re: Coming soon - RepRap magazine: issue #1
February 19, 2013 02:23PM
If someone were to write an article and submit it to you, will it at least be considered for inclusion in an issue?
VDX
Re: Coming soon - RepRap magazine: issue #1
February 19, 2013 03:37PM
... short answer - yes! grinning smiley

This RepRap-magazine should be a platform for the community with varying themes and sections, that will be selected by interest and/or common sense ...


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
VDX
Re: Coming soon - RepRap magazine: issue #1
February 19, 2013 05:26PM
... here's the link to the mag site:

[reprapmagazine.com]

#1 will be launched soon ...


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: Coming soon - RepRap magazine: issue #1
February 19, 2013 06:19PM
Looking forward to it!
VDX
RepRap magazine: issue #1 - launched!
February 22, 2013 04:49AM
It's online now - enjoy! smileys with beer

[reprapmagazine.com]


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: RepRap magazine: issue #1 - launched!
February 22, 2013 07:11AM
Excellent job everyone!


- akhlut

Just remember - Iterate, Iterate, Iterate!

[myhomelessmind.blogspot.com]
Re: RepRap magazine: issue #1 - launched!
February 23, 2013 08:56AM
Thanks guys,


This is a nice magazine, nice to read up on all the different slicers and great to see the interview with Adrian..

Already looking forward to nr 2!!

With kind regards,

Michael Hensen
Re: RepRap magazine: issue #1
February 23, 2013 11:12AM
Great issue! Over in our solidoodle forums we have been discussing a different Z-wobble issue that was not covered in your 4 page article on the situaiton. One of our members has developed a firmware modification that allows us to compensate for our banding and get amazing prints.

Soliforum: Z-wobble compensation discussion
Solidoodle Wiki: Z Wobble Calibration
Solidoodle Wiki: Banding

Looking forward to future issues!

Edited 2 time(s). Last edit at 02/23/2013 11:14AM by nickythegreek.
Re: RepRap magazine: issue #1
February 23, 2013 02:59PM
Congratulations on issue 1. Very professional and lots of content and images.

My highlights were the interview with Adrian Bowyer and information about new developments such as resin printers.

I hope this will encourage others to submit articles for publication.

I was a little disappointed when I opened my copy that you had failed to include a free toy.....not to be put off though I printed my own!

I have however kept a copy of issue 1 as I know in future that first editions are always worth something.

Please don't email me asking for a copy of my first edition though as this will just devalue my own.

I am looking forward to issue 2. Will this be in 3D? If so can you make sure you supply the 3D glasses or at the very least a link to the model!

Edited 1 time(s). Last edit at 02/23/2013 03:13PM by martinprice2004.
Re: RepRap magazine: issue #1
February 24, 2013 06:05AM
nickythegreek Wrote:
-------------------------------------------------------
> Great issue! Over in our solidoodle forums we
> have been discussing a different Z-wobble issue
> that was not covered in your 4 page article on the
> situaiton. One of our members has developed a
> firmware modification that allows us to compensate
> for our banding and get amazing prints.
>
> Soliforum: Z-wobble compensation discussion
> Solidoodle Wiki: Z Wobble Calibration
> Solidoodle Wiki: Banding

That's a really interesting development, I get similar Z banding. I'm still trying to get my head around what causes the error, I think they are saying it is due to inaccurate pitch on the threaded rod?

A software mod would be a cheaper fix than fitting leadscrews.
Re: RepRap magazine: issue #1
February 24, 2013 02:11PM
bobc,

it pretty much solved my banding issues altogether.
Re: RepRap magazine: issue #1
February 25, 2013 10:00AM
Guys - excellent articles, and I particularly enjoyed the on Z-Axis wobble and the various slicers.

Please note, however, that the problem that Rich experienced with KISS on the stretchlet was due to his configuration....
Re: RepRap magazine: issue #1
February 25, 2013 12:21PM
Great release and articles! Congrats!!!

I just shared at RepRap Community Japan on Facebook page too.

I will keep my eye on for the next winking smiley

Excellent job!!
Re: RepRap magazine: issue #1
February 25, 2013 12:51PM
Hello everyone,

I've attached a steps calculator to help with finding good layer heights as outlined in Z-artifact article.


- akhlut

Just remember - Iterate, Iterate, Iterate!

[myhomelessmind.blogspot.com]
Attachments:
open | download - Steps Calculator.xlsx (43 KB)
Re: RepRap magazine: issue #1
February 27, 2013 05:01AM
I love the magazine. I am really surprised by the high quality of the articles.

I think I noticed two typos though. Page 13, right column, someone forgot to put the question in the gray italic font. Page 36, left column, ping-ping instead of ping-pong.

I am really looking forward to the next issue.
Re: RepRap magazine: issue #1
February 27, 2013 07:41AM
Hi guys

We are very glad that the magazine is getting so many good comments and feedback!

The advices and suggestions already made will be taken under consideration during the development of the project, and always feel free to send us an email.

As for the first edition, well we missed some typos..our apologies. We have reviewed some that were mentioned and made the pdfs already available for download. We will do this again if more are spotted.

We have also received some photos sharing and some article suggestions, and we are currently defining the content for issue 2. So if someone is considering submitting content for issue 2 now is a good time for a first contact (but you can do it anytime).

Cheers,
Paulo
Re: RepRap magazine: issue #1
February 27, 2013 08:28AM
Excellent first issue, can't wait for issue 2....

Good Job Guys....
Re: RepRap magazine: issue #1
February 28, 2013 11:45AM
can you add an RSS feed to the magazine webpage? i'd love to add it to my google reader so i never miss an issue!
Re: RepRap magazine: issue #1
February 28, 2013 01:47PM
Hi @rockethacker - that's on the todo list - i'll post here when it's there.


------------------------------------------
garyhodgson.com/reprap | reprap.development-tracker.info | thingtracker.net
Re: RepRap magazine: issue #1
February 28, 2013 03:55PM
Hi everyone - the RSS feed is now implemented.

Direct link = [reprapmagazine.com]


------------------------------------------
garyhodgson.com/reprap | reprap.development-tracker.info | thingtracker.net
Re: RepRap magazine: issue #1
March 01, 2013 10:21AM
what are the article submission guidelines?

do you want things written in latex/tex/office/pagestream/wordstar/pdf ?? how do you want article source to be submitted?
Re: RepRap magazine: issue #1
March 01, 2013 10:34AM
We are doing a how to/guidelines that will be publish in issue 2, but for now a simple word document is fine.

Paulo
Re: RepRap magazine: issue #1
March 02, 2013 01:44PM
Request topic for future issue:

Printing with support.
Re: RepRap magazine: issue #1
March 03, 2013 09:11AM
perfect, you save my sunday smiling smiley

and where is the paypalbutton or flattr?
Re: RepRap magazine: issue #1
March 03, 2013 10:14AM
+1 to a donate button on the mag page. Seems plenty of people would love to give a little.
Re: RepRap magazine: issue #1 - Z banding
March 04, 2013 03:23PM
The article on z-banding artifacts got me to do some investigation.
I'm using a Printrbot Plus, which has smooth rods to constrain the direction of motion on the z-axis, so "wobble" is not an issue.
The article says that only true full steps of the stepper motor are repeatable and accurate. But in my experience with the Printrbot and Kysan motors, microstepping seems to work just fine. This eases up the problem considerably.

So, what are we looking for on the Z axis?
A) Perfect calibration (a 100mm tall object is exactly 100mm tall)
cool smiley No Banding due to roundoff errors (i.e. we want all layers to have the same number of steps or microsteps)
C) The ability to select specific layer heights.

Well, we can have any two out of three.

I'm using 18 turns/inch brass rod. I have chosen to allow a 0.3% error in Calibration. Instead of 2267.72... microsteps per millimeter I'm using 2260. This allows me to choose "rational" layer heights in increments of 0.05mm and get layers which are an integral number of microsteps per layer.

Not everyone fully agrees; there's a lively forum topic in the Printrbottalk pages.
[www.printrbottalk.com]
Sorry, only registered users may post in this forum.

Click here to login