Repetier: ABL nicht korrekt 20. October 2016 05:47 |
Registrierungsdatum: 7 Jahre zuvor Beiträge: 34 |
Re: Repetier: ABL nicht korrekt 20. October 2016 06:28 |
Registrierungsdatum: 8 Jahre zuvor Beiträge: 922 |
Re: Repetier: ABL nicht korrekt 20. October 2016 11:35 |
Registrierungsdatum: 7 Jahre zuvor Beiträge: 34 |
17:30:25.729 : Info:Autoleveling disabled 17:30:30.865 : Z-probe:20.14 X:25.00 Y:45.00 17:30:38.980 : Z-probe:20.29 X:150.00 Y:45.00 17:30:47.329 : Z-probe:20.05 X:25.00 Y:150.00 17:30:50.457 : plane: a = 0.0012 b = -0.0008 c = 20.1463 17:30:50.457 : Transformation matrix: 0.999999 0.000000 -0.001181 0.000001 1.000000 0.000834 0.001181 -0.000834 0.999999 17:30:50.457 : CurrentZ:20.15 atZ:10.13 17:30:50.886 : Info:Autoleveling enabled 17:30:50.886 : X:24.98 Y:150.02 Z:20.049 E:0.0000
;FLAVOR:RepRap ;TIME:154 M190 S60.000000 M104 S250.000000 M109 S250.000000 G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G32 S2 ;start abl process G92 E0 ;zero the extruded length G1 F200 E3 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again G1 F9000 ;Put printing message on LCD screen M117 Printing... ;Generated with Cura_SteamEngine 2.1.3 ;LAYER_COUNT:1 ;LAYER:0 M107 G1 F1500.000000 E-6.50000 G0 F7200.00000 X21.243 Y21.246 Z0.300 G0 X20.926 Y21.616 ;TYPEKIRT