Mr & Mrs Hoot have Brain Surgery......

I printed Mr & Mrs Hoot above, at full size which took 4/5hrs... I was really looking forward to seeing the end result, till the last 10 miutes, and I saw they had clearly had Brain Surgery.....
Printed at 195' with 10% infill (Slic3r kept setting the temp to 255' I saw in the file BTW)...
Will try again tomorrow with 20% infill....

---

Please send me a PM if you have suggestions, or problems with Big Blue 360.
I won't see comments in threads, as I move around to much.
Working Link to Big Blue 360 Complete

Maybe better to have more solid tops layers?
On 2nd tought: scrap that, looks like more than 20 layers from the top

Edited 1 time(s). Last edit at 05/15/2014 12:48PM by auser.

Oh noes!, poor ho...owl's!

Know how you feel..



Edit: Here's something to cheer you up



Erik

Edited 1 time(s). Last edit at 05/15/2014 01:00PM by ormerod168.

I did a 60% scaled copy of Mr&Mrs Hoot with 20 Solid Top layers, and it came out perfectly.
I've also turned on ZLift on retract, with a height of 0.1mm, and that's made a big differance tooooooooooo!
The quality of the whole print has improved.

---

Please send me a PM if you have suggestions, or problems with Big Blue 360.
I won't see comments in threads, as I move around to much.
Working Link to Big Blue 360 Complete

Quote
auser
Maybe better to have more solid tops layers?
On 2nd tought: scrap that, looks like more than 20 layers from the top

No, what it looks to me that it needs is more perimeters (i.e. thicker walls). It should then print fine without any infill given Kev's bridging ability.

Dave
(#106)