Laser cut Aluminium X-Arm & Rib kits....
Posted by Davek0974
|
Re: Laser cut Aluminium X-Arm & Rib kits.... March 28, 2015 09:09AM |
Ok we're out of stock again so I'm taking pre-orders for the next batch.
I'll start when I have five orders this time.
Thanks for your continued interest.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
I'll start when I have five orders this time.
Thanks for your continued interest.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... March 30, 2015 01:53PM |
Brilliant, thanks
Four more to go.....
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Four more to go.....
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... March 30, 2015 07:06PM |
One X arm and one bed support kit, please
Edited 1 time(s). Last edit at 03/30/2015 07:34PM by phedoreanu.
Edited 1 time(s). Last edit at 03/30/2015 07:34PM by phedoreanu.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... March 31, 2015 01:32PM |
Great stuff, three more
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 01, 2015 03:42PM |
Great stuff, a couple more and I'll get them underway.
Thanks
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Thanks
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 05, 2015 10:10AM |
Quote
Mauro085
i am interested
Excellent, that will do It, I'll be.back home Monday and can get going on Tuesday.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 05, 2015 04:08PM |
Hi, if the arm is the new model with countersunk holes then the screws are M3x8mm, if the old version then they are M3x10mm
Fitting is exactly the same as the acrylic item so the instructions are the easiest place or just make notes as you strip the the acrylic one off.
If you get stuck, I can send you some more screws.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Fitting is exactly the same as the acrylic item so the instructions are the easiest place or just make notes as you strip the the acrylic one off.
If you get stuck, I can send you some more screws.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 06, 2015 01:37PM |
Hi all,
Time has come again to request all those that expressed an interest in the x-arm kit pop on over to my site here DD Metal Products and make their orders please.
I am expecting to have the new batch ready to dispatch by Friday week, around ten working days.
Once again, thanks for your interest in the upgrades.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Time has come again to request all those that expressed an interest in the x-arm kit pop on over to my site here DD Metal Products and make their orders please.
I am expecting to have the new batch ready to dispatch by Friday week, around ten working days.
Once again, thanks for your interest in the upgrades.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 14, 2015 11:07AM |
Good news
New stock of the X-Axis arm kit will be ready by Friday this week (17th April) so I will be shipping all pre-orders on Monday 20th if I can't get them done in time for post on the Friday.
Thanks
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
New stock of the X-Axis arm kit will be ready by Friday this week (17th April) so I will be shipping all pre-orders on Monday 20th if I can't get them done in time for post on the Friday.
Thanks
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 21, 2015 02:08PM |
After a bit of a do with quality control which caused an unexpected delay, the x-arm kits are now back in stock.
All orders will be shipped tomorrow.
Plenty left if anyone wants one.
Many thanks
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
All orders will be shipped tomorrow.
Plenty left if anyone wants one.
Many thanks
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 22, 2015 11:02AM |
Hi all, as above post discovered,
please do not go to our web site until further notice, it has been hacked and wiped-out completely !!
I am working on getting a new server/host up and running as fast as possible.
Thank you
ALL outstanding orders were posted successfully today, anyone who would like an arm kit or bed can still buy via ebay as before.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
please do not go to our web site until further notice, it has been hacked and wiped-out completely !!
I am working on getting a new server/host up and running as fast as possible.
Thank you
ALL outstanding orders were posted successfully today, anyone who would like an arm kit or bed can still buy via ebay as before.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 22, 2015 04:55PM |
It's not looking good at the moment, it was just after changing to a new host so backups are dodgy, working on it though.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... April 23, 2015 02:58PM |
Web site is back up again, some fine tuning to do but it's back at last.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... May 09, 2015 03:48AM |
Just a reminder that I still have plenty of x-arm kits left.
Beds for the mk1 are now end-of-line I think, I have two left if there are any mk1 owners out there without one, I doubt I will be running another batch.
Thanks
Edited 1 time(s). Last edit at 05/09/2015 03:48AM by Davek0974.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Beds for the mk1 are now end-of-line I think, I have two left if there are any mk1 owners out there without one, I doubt I will be running another batch.
Thanks
Edited 1 time(s). Last edit at 05/09/2015 03:48AM by Davek0974.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... May 13, 2015 01:34PM |
Hi,
thanks for enquiring about our product,
If you are collecting the arm in person, then the local pickup is the correct option.
Many thanks
Dave Kearley
Edited 1 time(s). Last edit at 05/13/2015 01:35PM by Davek0974.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
thanks for enquiring about our product,
If you are collecting the arm in person, then the local pickup is the correct option.
Many thanks
Dave Kearley
Edited 1 time(s). Last edit at 05/13/2015 01:35PM by Davek0974.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... May 13, 2015 02:20PM |
It's a bit of a walk and a swim from the US northwest. I would need to ship it but I cant find a way to pick an actual shipping option.
(Edit: By 'if she could pick up' I meant 'order for me', sorry for the confusion there)
Edited 1 time(s). Last edit at 05/13/2015 02:21PM by achaz.
(Edit: By 'if she could pick up' I meant 'order for me', sorry for the confusion there)
Edited 1 time(s). Last edit at 05/13/2015 02:21PM by achaz.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... May 14, 2015 01:42AM |
Apologies, I will look into this today.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... May 14, 2015 03:37AM |
Should be working OK now, apologies for the trouble.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
|
Re: Laser cut Aluminium X-Arm & Rib kits.... May 16, 2015 06:21AM |
Quote
Europa
Hi Dave, are the aluminium X arm still available?
Brian
Hi
yes i still have stock, you can get them from my site, link is below...
thanks
Dave
Another RS Ormerod Mk1 meets the world
Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Sorry, only registered users may post in this forum.