Re: Laser cut Aluminium X-Arm & Rib kits....
December 09, 2014 09:59AM
Ok, finally got there smiling smiley

The new arms are on order, these will fit directly onto the Mk2 Ormerod and also onto the Mk1 Ormerod with the addition of this little print (thanks Ormerod168)...

Ormerod RepRapPro 3D Printer. Extra support for the extruder:
[www.thingiverse.com]

Or you can simply print the Mk2 extruder mount.

The price is as before, £40 a set including assembly screws, plus postage of £5 for UK, £8 for EU and £10 for ROW.

I can now take pre-payments to sales@ddmetalproducts.co.uk via paypal.

They will also be going on eBay as soon as ready and on eMakershop too.

I am hoping very much to get these posted before the holiday starts so please get your orders in now smiling smiley

Thanks for the interest

Dave

Edited 3 time(s). Last edit at 12/09/2014 10:02AM by Davek0974.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 09, 2014 10:39AM
Sent :-)

Many Thanks for your hard work

Mick.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 09, 2014 12:35PM
smiling smiley SENT as well!
Re: Laser cut Aluminium X-Arm & Rib kits....
December 09, 2014 04:48PM
Pre order sent! Looking forward.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 09, 2014 05:06PM
Sent. Cheers for sorting out.

Jon

Edited 1 time(s). Last edit at 12/09/2014 05:07PM by jsv555.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 10, 2014 06:27PM
Pre order sent.
Thank you for your hard work!
Re: Laser cut Aluminium X-Arm & Rib kits....
December 11, 2014 09:05AM
Too late to say "YES PLEASE" ?


James

Edited 1 time(s). Last edit at 12/11/2014 09:15AM by jamesf.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 11, 2014 02:01PM
Quote
jamesf
Too late to say "YES PLEASE" ?


James

Of course not, details to order are in a post above.

Thanks

Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 11, 2014 03:43PM
Payment sent, thanks again!

Luke
Re: Laser cut Aluminium X-Arm & Rib kits....
December 12, 2014 01:48AM
Payment Made

Thanks

James
Re: Laser cut Aluminium X-Arm & Rib kits....
December 12, 2014 02:05AM
Payment Made
Thanks!
/Tomas
Re: Laser cut Aluminium X-Arm & Rib kits....
December 12, 2014 04:04AM
I'LL TAKE ONE!!!!

PAYMENT SENT!
Re: Laser cut Aluminium X-Arm & Rib kits....
December 13, 2014 09:34AM
How much extra weight do the aluminium weigh compared to the acrylic? Awesome work!
Re: Laser cut Aluminium X-Arm & Rib kits....
December 13, 2014 10:39AM
Quote
RoSt
How much extra weight do the aluminium weigh compared to the acrylic? Awesome work!

I think it's about three times the weight, but in reality it makes no difference, the benefits far outweigh the weight increase.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 14, 2014 05:51AM
Quote
RoSt
How much extra weight do the aluminium weigh compared to the acrylic? Awesome work!

X-Axis-Plate + X-Rib, acrylic = 139gram
Ditto aluminium = 325gram

There is AFAIK no downside to the added weigh, one upside I can think of is the nozzle can do the shimmy with less vibration, another one would be the aluminium don't suck as much heat as the black body acrylic parts and will help in keeping the ormerod printed parts cooler

Erik
Re: Laser cut Aluminium X-Arm & Rib kits....
December 16, 2014 06:53AM
Payment sent
Re: Laser cut Aluminium X-Arm & Rib kits....
December 16, 2014 08:02AM
When in the cut-off period for ordering these? I am waiting for pay day :I
Re: Laser cut Aluminium X-Arm & Rib kits....
December 16, 2014 11:54AM
Quote
Davek0974
Quote
RoSt
How much extra weight do the aluminium weigh compared to the acrylic? Awesome work!

I think it's about three times the weight, but in reality it makes no difference, the benefits far outweigh the weight increase.

Thanks, i will order one of these if they still are available.

My acrylic plates was broken when i got my O2, i have glued them now but wanted a more permanent solution.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 16, 2014 12:06PM
Do you think I should wait to mount the ormerod2 for these to arrive or not?
This is not my only printer and I can wait, even if ... Waiting to mount it is getting very difficult!
Re: Laser cut Aluminium X-Arm & Rib kits....
December 16, 2014 12:19PM
Quote
Pyro
When in the cut-off period for ordering these? I am waiting for pay day :I

No cut off period yet, should be ok for a while yet.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 16, 2014 12:21PM
Quote
Fpex
Do you think I should wait to mount the ormerod2 for these to arrive or not?
This is not my only printer and I can wait, even if ... Waiting to mount it is getting very difficult!

The arm is a bit of a strip down to fit so if not essential, I would wait.

I think my one took me an hour to fit on a mk1.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 16, 2014 12:22PM
Quote
RoSt
Quote
Davek0974
Quote
RoSt
How much extra weight do the aluminium weigh compared to the acrylic? Awesome work!

I think it's about three times the weight, but in reality it makes no difference, the benefits far outweigh the weight increase.

Thanks, i will order one of these if they still are available.

My acrylic plates was broken when i got my O2, i have glued them now but wanted a more permanent solution.

Yes, I'm taking ore-orders so order when ready.

Thanks


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 18, 2014 03:50AM
I am waiting then, hopefully will not take too long :-)
Re: Laser cut Aluminium X-Arm & Rib kits....
December 18, 2014 10:26AM
just saw your sale for the Y carriage on Fleabay and bought it haha ! still rocking the Ormerod 1 ^^
Re: Laser cut Aluminium X-Arm & Rib kits....
December 18, 2014 01:42PM
In the post on Friday smiling smiley

Many thanks


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 18, 2014 02:05PM
Will you put up the X arm on ebay or just sell them here?
Re: Laser cut Aluminium X-Arm & Rib kits....
December 18, 2014 02:43PM
Quote
RoSt
Will you put up the X arm on ebay or just sell them here?

Once the pre-orders are sorted I should be putting some up on eBay.

Thanks


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 19, 2014 01:08PM
I am very happy to announce that the new arms are in, they look excellent too.

I will be preparing them and packing this weekend and all pre-orders will be off to the post office on Monday morning.

Thanks for the pre-orders and yes, I have plenty of stock left so any more who want can order when wanted.

I will not be shipping again until after Christmas though as we are away, you can of course place your orders though.


Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
December 19, 2014 05:05PM
great!
Re: Laser cut Aluminium X-Arm & Rib kits....
December 21, 2014 05:18AM
Great stuff can't wait to get it and get printing
Sorry, only registered users may post in this forum.

Click here to login