Re: Laser cut Aluminium X-Arm & Rib kits....
March 28, 2015 09:09AM
Ok we're out of stock again so I'm taking pre-orders for the next batch.

I'll start when I have five orders this time.

Thanks for your continued interest.


Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
March 30, 2015 04:22AM
Put me down for one
Re: Laser cut Aluminium X-Arm & Rib kits....
March 30, 2015 01:53PM
Brilliant, thanks

Four more to go.....


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
March 30, 2015 07:06PM
One X arm and one bed support kit, please smiling smiley

Edited 1 time(s). Last edit at 03/30/2015 07:34PM by phedoreanu.
Re: Laser cut Aluminium X-Arm & Rib kits....
March 31, 2015 01:32PM
Great stuff, three more smiling smiley


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 01, 2015 03:28PM
Ah heck, one of each for me too please!
Re: Laser cut Aluminium X-Arm & Rib kits....
April 01, 2015 03:42PM
Great stuff, a couple more and I'll get them underway.

Thanks


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 05, 2015 09:17AM
i am interested
Re: Laser cut Aluminium X-Arm & Rib kits....
April 05, 2015 10:10AM
Quote
Mauro085
i am interested

Excellent, that will do It, I'll be.back home Monday and can get going on Tuesday.

smiling smiley


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 05, 2015 10:21AM
What are the specs of the screws provided. This set has been laying around here so long the screws got legs and walked away on their own. Also, is there some sort of instructions to read for doing a replacement on the old ormerod version or am I supposed to read the original assembly instruction?

Thanks!
Re: Laser cut Aluminium X-Arm & Rib kits....
April 05, 2015 04:08PM
Hi, if the arm is the new model with countersunk holes then the screws are M3x8mm, if the old version then they are M3x10mm

Fitting is exactly the same as the acrylic item so the instructions are the easiest place or just make notes as you strip the the acrylic one off.

If you get stuck, I can send you some more screws.

Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 06, 2015 02:39AM
I think I'm best off if you send me a set of screws. I bought the arm in beginning of January, the holes are countersunk. I'll send you my address in a PM. Let me know how much you want for them including shipping and I do a PayPal transfer.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 06, 2015 01:37PM
Hi all,

Time has come again to request all those that expressed an interest in the x-arm kit pop on over to my site here DD Metal Products and make their orders please.

I am expecting to have the new batch ready to dispatch by Friday week, around ten working days.

Once again, thanks for your interest in the upgrades.

Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 14, 2015 11:07AM
Good news

New stock of the X-Axis arm kit will be ready by Friday this week (17th April) so I will be shipping all pre-orders on Monday 20th if I can't get them done in time for post on the Friday.

Thanks


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 21, 2015 02:08PM
After a bit of a do with quality control which caused an unexpected delay, the x-arm kits are now back in stock.

All orders will be shipped tomorrow.

Plenty left if anyone wants one.


Many thanks
Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 22, 2015 05:10AM
Dave, for me every product on your website comes up with " No products were found matching your selection." both on Chrome and Firefox?


RS Components Reprap Ormerod No. 481
Re: Laser cut Aluminium X-Arm & Rib kits....
April 22, 2015 11:02AM
Hi all, as above post discovered,

please do not go to our web site until further notice, it has been hacked and wiped-out completely !!

I am working on getting a new server/host up and running as fast as possible.

Thank you



ALL outstanding orders were posted successfully today, anyone who would like an arm kit or bed can still buy via ebay as before.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 22, 2015 02:34PM
Sorry to hear that Dave. Hope you get it sorted without too much hassle.


RS Components Reprap Ormerod No. 481
Re: Laser cut Aluminium X-Arm & Rib kits....
April 22, 2015 04:55PM
It's not looking good at the moment, it was just after changing to a new host so backups are dodgy, working on it though.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
April 23, 2015 02:58PM
Web site is back up again, some fine tuning to do but it's back at last.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
May 09, 2015 03:48AM
Just a reminder that I still have plenty of x-arm kits left.

Beds for the mk1 are now end-of-line I think, I have two left if there are any mk1 owners out there without one, I doubt I will be running another batch.

Thanks

Edited 1 time(s). Last edit at 05/09/2015 03:48AM by Davek0974.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
May 09, 2015 05:50AM
Thanks for the prod, just got a bed on order - which I'd been meaning to get round to for ages!


RS Components Reprap Ormerod No. 481
Re: Laser cut Aluminium X-Arm & Rib kits....
May 13, 2015 01:08PM
Was going to ask my boss if she could pick up the arm upgrade for our office printer, but I can't seem to select a shipping option other than Local Pickup?
Re: Laser cut Aluminium X-Arm & Rib kits....
May 13, 2015 01:34PM
Hi,

thanks for enquiring about our product,


If you are collecting the arm in person, then the local pickup is the correct option.

Many thanks

Dave Kearley

Edited 1 time(s). Last edit at 05/13/2015 01:35PM by Davek0974.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
May 13, 2015 02:20PM
It's a bit of a walk and a swim from the US northwest. I would need to ship it but I cant find a way to pick an actual shipping option.


(Edit: By 'if she could pick up' I meant 'order for me', sorry for the confusion there)

Edited 1 time(s). Last edit at 05/13/2015 02:21PM by achaz.
Re: Laser cut Aluminium X-Arm & Rib kits....
May 14, 2015 01:42AM
Apologies, I will look into this today.


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
May 14, 2015 03:37AM
Should be working OK now, apologies for the trouble.

Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
May 16, 2015 05:53AM
Hi Dave, are the aluminium X arm still available?


Brian
Re: Laser cut Aluminium X-Arm & Rib kits....
May 16, 2015 06:21AM
Quote
Europa
Hi Dave, are the aluminium X arm still available?


Brian

Hi

yes i still have stock, you can get them from my site, link is below...



thanks

Dave


Another RS Ormerod Mk1 meets the world smiling smiley

Retired now but I used to make....
CNC Machined Mk1 aluminium bed support plates for the Ormerod
CNC machined X-plates and ribs for Mk1 & Mk2 Ormerods
CNC machined bed support arms for the Mk2 Ormerod.
Dual Hot-End heatsink blocks.
Re: Laser cut Aluminium X-Arm & Rib kits....
May 16, 2015 06:31AM
Will you still be making the Ormerod Aluminum X Plate in abaut 1 month? and is it compatible with Ormerod 2?
Sorry, only registered users may post in this forum.

Click here to login