Small extension board for more stepper driver

DasBasti

Small extension board for more stepper driver
March 07, 2016 11:05AM

Registered: 8 years ago
Posts: 57

Hi,

I built a small extension board to plug into the Duet pin header. It carries up to four additional stepper driver (pololu modules).

duex.JPG

It is super useful when you want to add a diamond hotend to your ormerod.

Some more information and how to get your own are on my Blog

I would really appreciate any feedback on this thing.

Reply Quote

Treito

Re: Small extension board for more stepper driver
March 07, 2016 01:50PM

Registered: 8 years ago
Posts: 1,699

The picture is very very small...

Slicer: Simplify3D 4.0; sometimes CraftWare 1.14 or Cura 2.7
Delta with Duet-WiFi, FW: 1.20.1RC2; mini-sensor board by dc42 for auto-leveling
Ormerod common modifications: Mini-sensor board by dc42, aluminum X-arm, 0.4 mm nozzle E3D like, 2nd fan, Z stepper nut M5 x 15, Herringbone gears, Z-axis bearing at top, spring loaded extruder with pneumatic fitting, Y belt axis tensioner
Ormerod 2: FW: 1.19-dc42 on Duet-WiFi. own build, modifications: GT2-belts, silicone heat-bed, different motors and so on. Printed parts: bed support, (PSU holder) and Y-feet.
Ormerod 1: FW: 1.15c-dc42 on 1k Duet-Board. Modifications: Aluminium bed-support, (nearly) all parts reprinted in PLA/ ABS, and so on.

Reply Quote

DasBasti

Re: Small extension board for more stepper driver
March 07, 2016 02:26PM

Registered: 8 years ago
Posts: 57

Sorry, I got the thumbnail uplaoded...

[2.bp.blogspot.com]

Reply Quote

dougal1957

Re: Small extension board for more stepper driver
March 07, 2016 03:35PM

Registered: 8 years ago
Posts: 1,159

Still very small

Reply Quote

DasBasti

Re: Small extension board for more stepper driver
March 07, 2016 03:48PM

Registered: 8 years ago
Posts: 57

strange... does this work?

duex.JPG

Reply Quote

Treito

Re: Small extension board for more stepper driver
March 07, 2016 06:56PM

Registered: 8 years ago
Posts: 1,699

This looks good.

Slicer: Simplify3D 4.0; sometimes CraftWare 1.14 or Cura 2.7
Delta with Duet-WiFi, FW: 1.20.1RC2; mini-sensor board by dc42 for auto-leveling
Ormerod common modifications: Mini-sensor board by dc42, aluminum X-arm, 0.4 mm nozzle E3D like, 2nd fan, Z stepper nut M5 x 15, Herringbone gears, Z-axis bearing at top, spring loaded extruder with pneumatic fitting, Y belt axis tensioner
Ormerod 2: FW: 1.19-dc42 on Duet-WiFi. own build, modifications: GT2-belts, silicone heat-bed, different motors and so on. Printed parts: bed support, (PSU holder) and Y-feet.
Ormerod 1: FW: 1.15c-dc42 on 1k Duet-Board. Modifications: Aluminium bed-support, (nearly) all parts reprinted in PLA/ ABS, and so on.

Reply Quote

Traumflug

Re: Small extension board for more stepper driver
March 09, 2016 08:27AM

Registered: 12 years ago
Posts: 7,616

... there is a "Preview" button next to the "Post message" one ... :-)

Generation 7 Electronics	Teacup Firmware	RepRap DIY

Reply Quote