Auto Bed Compensation button has vanished from interface

Hey! My Ormerod has been offline for about a month while waiting on a new hotend. I disconnected everything from the Duet during this time. After swapping out the hotend and re-connecting all of the wires, I fired up the Web Control interface only to discover that the bed leveling button has disappeared. Why would it vanish, and how can I get it back?



Firmware Name: RepRapFirmware
Firmware Version: 1.09r-dc42 (2016-01-16)
Web Interface Version: HTML: 1.08, JS: 1.08

Duet is 0.8.5

Any help is appreciated!
~0

The zoom level for that particular browser window is too high. Note how you don't have the axis +/- 100 buttons either. Reducing the zoom level should make the missing buttons reappear.

Cheers,
Bart

Edited 1 time(s). Last edit at 03/13/2016 04:13AM by bartdietrich.

Ha! Good spot, I knew it had to be something simple

Strange, that was set at 100% zoom in Chrome. Setting it to 90% revealed the button, as well as my +100 axes (which I overlooked).

Quote
0x0000
Ha! Good spot, I knew it had to be something simple

It was a bit of a facepalm moment for me when I had the same issue and eventually figured it out... :-)