Regpye's is not an extruder...
Posted by cristian
|
Regpye's is not an extruder... October 05, 2014 01:58PM |
...is a magic wand that gently melts any kind of plastic!
No matter what temperature or printing speed or filament type, never had a clog.
And thanks to it I can finally print even Colorfabb XT and Ninjaflex with my Smartrap without heated bed!
Many thanks Reg!
No matter what temperature or printing speed or filament type, never had a clog.
And thanks to it I can finally print even Colorfabb XT and Ninjaflex with my Smartrap without heated bed!
Many thanks Reg!
|
Re: Regpye's is not an extruder... October 06, 2014 03:08AM |
Im not surprised of this good result with reg hot-end. They are obviously high end hot ends 
the Smartrap project
[smartfriendz.com]
[www.thingiverse.com]
[reprap.org]
[github.com]
doc assemblage: [reprap.org]
NEW: Forum smartfriendz: [smartraptalk.smartfriendz.com]
the Smartrap project
[smartfriendz.com]
[www.thingiverse.com]
[reprap.org]
[github.com]
doc assemblage: [reprap.org]
NEW: Forum smartfriendz: [smartraptalk.smartfriendz.com]
|
Re: Regpye's is not an extruder... October 06, 2014 03:54AM |
Quote
smartfriendz
Im not surprised of this good result with reg hot-end. They are obviously high end hot ends
But they don't have a high end price Serge.
I guess you have been too busy to try yours out yet?
All in good time, I have another that I think I will send you, this may help you with your design program for future SmartRap machines
[regpye.com.au]
"Experience is the mother of all knowledge." --Leonardo da Vinci
|
Re: Regpye's is not an extruder... October 06, 2014 09:12AM |
I confirm that RegPye's hot end is high end design! My only problem now is with skipping extruder from time to time, and probably its because of mk7gear teeth.
I will change extruder to RegPye's design and the printer will be like a dream
I will change extruder to RegPye's design and the printer will be like a dream
|
Re: Regpye's is not an extruder... October 06, 2014 10:10AM |
yes reg, i forgot to say they where high end quality and not price ! it's maybe the most important, sorry
for the extruder, i had good result lately in production with the small direct drive and nk7..but still at 60mm/s and the drive printed at 50% fill or more , to be more solid.
the Smartrap project
[smartfriendz.com]
[www.thingiverse.com]
[reprap.org]
[github.com]
doc assemblage: [reprap.org]
NEW: Forum smartfriendz: [smartraptalk.smartfriendz.com]
for the extruder, i had good result lately in production with the small direct drive and nk7..but still at 60mm/s and the drive printed at 50% fill or more , to be more solid.
the Smartrap project
[smartfriendz.com]
[www.thingiverse.com]
[reprap.org]
[github.com]
doc assemblage: [reprap.org]
NEW: Forum smartfriendz: [smartraptalk.smartfriendz.com]
Sorry, only registered users may post in this forum.