Welcome! Log In Create A New Profile

Bowden Extruber

Posted by rcjoseb

Forum List Message List New Topic

rcjoseb

Bowden Extruber
January 22, 2015 09:31PM

Registered: 11 years ago
Posts: 180

I made a couple of simple chamges in the way I put the Bowden extruder together to make it simpler.

Reply Quote

Attachments:
open | download - Extruder I.png (512.5 KB)
open | download - Extruder II.png (554.4 KB)
open | download - Extruder III.png (571.8 KB)
open | download - Extruder IV.png (558.4 KB)

solomondg

Re: Bowden Extruber
January 25, 2015 07:21PM

Registered: 12 years ago
Posts: 56

I hated the extruder (not much force, could never get the filament through the nut), so I just swapped it out with an Airtripper BSP. Never looked back!

Reply Quote

cristian

Re: Bowden Extruber
January 26, 2015 05:41AM

Registered: 12 years ago
Posts: 344

Quote
solomondg
I hated the extruder (not much force, could never get the filament through the nut), so I just swapped it out with an Airtripper BSP. Never looked back!

Have you ever tried it with soft filaments ?

Reply Quote

ldanut

Re: Bowden Extruber
January 26, 2015 11:16AM

Registered: 12 years ago
Posts: 170

I have no issue with original extruder. It works perfectly with MK8 gear and 1/16 microstepping. If you need extra power you can drop microstepping to 1/8.

Edited 1 time(s). Last edit at 01/26/2015 11:17AM by ldanut.

Reply Quote

solomondg

Re: Bowden Extruber
February 26, 2015 07:31PM

Registered: 12 years ago
Posts: 56

Quote
solomondg
I hated the extruder (not much force, could never get the filament through the nut), so I just swapped it out with an Airtripper BSP. Never looked back!

Same! Works great now!

Reply Quote

smartfriendz

Re: Bowden Extruber
March 04, 2015 04:33PM

Registered: 12 years ago
Posts: 992

it's wonderful and smart job rc .. like solomon, i never like my extruders ( note it's not really mine, i always pick some ideas around ) . I do believe your tricks are really make it work better !

I will integrated the tricks in our forum too if i can ? thank you

the Smartrap project

[smartfriendz.com]
[www.thingiverse.com]
[reprap.org]
[github.com]
doc assemblage: [reprap.org]
NEW: Forum smartfriendz: [smartraptalk.smartfriendz.com]