A long due project is close to be finished. Goal was to test core-xy and to have a small (portable) printer. The printer has been testet with a birdsnest of wires :-)
And to get rid of the birsanest I added a box frame under the original for hiding all the electronics. A ramp board plus a Raspberry Pi with OctoPrint plus a powersupply.
I'm not sure about placement of the extruder. It may be moved to inside the box later.
The servo for bed levelling is a made from a simple wooden bracket.
All steppers (except extruder) is nema-14
Have fun
Niels