Welcome! Log In Create A New Profile

Advanced

Smartrap Move and Homing problem.

Posted by lynafox 
Forum List Message List New Topic
lynafox
Smartrap Move and Homing problem.
January 18, 2016 06:40AM
Hello everyone sorry for my english.

Im build a smartrap fishing line version everything is ok but i have a problem. X axis work very well but z and y axis problem manual control and homing.

If i push home button for z and y axis move 10 mm and stoped. If i try move 2 3 times move 10 mm and stopped. How can fix it ?. Thanks.
Reply Quote
ixlix
Re: Smartrap Move and Homing problem.
January 18, 2016 04:53PM
Have you set the jumpers under your stepper drivers correctly for the stepping? Eg 1/16th or 1/32?
Reply Quote
Billhc83
Re: Smartrap Move and Homing problem.
January 19, 2016 03:10AM
Have you checked the current/voltage settings on the y and z stepper drivers?
Reply Quote
lynafox
Re: Smartrap Move and Homing problem.
January 19, 2016 03:25AM
@ixlix 1/16 step

@Billhc83 Im not checked but y and z axis can move 1 direction.
Reply Quote
Billhc83
Re: Smartrap Move and Homing problem.
January 19, 2016 05:10AM
What are the endstop status are they already triggered for some reason?
Reply Quote
lynafox
Re: Smartrap Move and Homing problem.
January 20, 2016 05:10AM
Im fix my problem. Buy new endstops and set again no nc setting.
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login