questa è la stringa in config
; Z-Probe
M558 P4 C"zprobe.in+zprobe.mod" H5 F120 T6000 ; set Z probe type to switch and the dive height + speeds
G31 P500 X0 Y0 Z17 ; set Z probe trigger value, offset and trigger height
M557 R85 S20 ; define mesh grid
ho provato anche questa;
; Z-Probe
M558 P8 R0.4 F1200 H3 T6000 C"zprobe.in+zprobe.mod" ; Set Z probe type to switch and the dive height + speeds
G31 P100 X0 Y0 Z-0.1 ; Set Z probe trigger value, offset and trigger height
M557 R175 S16 ; Define mesh grid
qualcosa è migliorato, ora parte in automatico ma non va a tastare la superficie