Errori di compiler...aiutooooo
Posted by flyover1974
|
Errori di compiler...aiutooooo September 19, 2019 05:11PM |
Ciao a tutti,
sto impazzendo, volevo caricarmi un nuovo FW configurato sul sito di Repetier xche mi mancava z probe ed ora Arduino IDE mi da errori di compiling...
Questa é copia degli errori, qualcuno mi sa aiutare...divento matto
Arduino: 1.8.5 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
sketch\Eeprom.cpp: In static member function 'static void EEPROM::restoreEEPROMSettingsFromConfiguration()':
Eeprom.cpp:105: error: expected primary-expression before ';' token
heatedBedController.pidPGain = HEATED_BED_PID_PGAIN_OR_DEAD_TIME;
^
Eeprom.cpp:106: error: expected primary-expression before ';' token
heatedBedController.pidIGain = HEATED_BED_PID_IGAIN;
^
Eeprom.cpp:131: error: expected primary-expression before ';' token
e->stepsPerMM = EXT0_STEPS_PER_MM;
^
Eeprom.cpp:139: error: expected primary-expression before ';' token
e->tempControl.pidPGain = EXT0_PID_PGAIN_OR_DEAD_TIME;
^
Eeprom.cpp:140: error: expected primary-expression before ';' token
e->tempControl.pidIGain = EXT0_PID_I;
^
Eeprom.cpp:141: error: expected primary-expression before ';' token
e->tempControl.pidDGain = EXT0_PID_D;
^
sketch\Eeprom.cpp: In static member function 'static void EEPROM::initalizeUncached()':
Eeprom.cpp:467: error: expected primary-expression before ')' token
HAL::eprSetFloat(EPR_Z_PROBE_HEIGHT, Z_PROBE_HEIGHT);
^
sketch\Eeprom.cpp: In static member function 'static void EEPROM::readDataFromEEPROM(bool)':
Eeprom.cpp:663: error: expected primary-expression before ')' token
HAL::eprSetFloat(EPR_Z_PROBE_HEIGHT, Z_PROBE_HEIGHT);
^
exit status 1
expected primary-expression before ';' token
AIUUUUTOOOO
Grazie e saluti
Erman
Edited 1 time(s). Last edit at 09/19/2019 05:12PM by flyover1974.
sto impazzendo, volevo caricarmi un nuovo FW configurato sul sito di Repetier xche mi mancava z probe ed ora Arduino IDE mi da errori di compiling...
Questa é copia degli errori, qualcuno mi sa aiutare...divento matto
Arduino: 1.8.5 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
sketch\Eeprom.cpp: In static member function 'static void EEPROM::restoreEEPROMSettingsFromConfiguration()':
Eeprom.cpp:105: error: expected primary-expression before ';' token
heatedBedController.pidPGain = HEATED_BED_PID_PGAIN_OR_DEAD_TIME;
^
Eeprom.cpp:106: error: expected primary-expression before ';' token
heatedBedController.pidIGain = HEATED_BED_PID_IGAIN;
^
Eeprom.cpp:131: error: expected primary-expression before ';' token
e->stepsPerMM = EXT0_STEPS_PER_MM;
^
Eeprom.cpp:139: error: expected primary-expression before ';' token
e->tempControl.pidPGain = EXT0_PID_PGAIN_OR_DEAD_TIME;
^
Eeprom.cpp:140: error: expected primary-expression before ';' token
e->tempControl.pidIGain = EXT0_PID_I;
^
Eeprom.cpp:141: error: expected primary-expression before ';' token
e->tempControl.pidDGain = EXT0_PID_D;
^
sketch\Eeprom.cpp: In static member function 'static void EEPROM::initalizeUncached()':
Eeprom.cpp:467: error: expected primary-expression before ')' token
HAL::eprSetFloat(EPR_Z_PROBE_HEIGHT, Z_PROBE_HEIGHT);
^
sketch\Eeprom.cpp: In static member function 'static void EEPROM::readDataFromEEPROM(bool)':
Eeprom.cpp:663: error: expected primary-expression before ')' token
HAL::eprSetFloat(EPR_Z_PROBE_HEIGHT, Z_PROBE_HEIGHT);
^
exit status 1
expected primary-expression before ';' token
AIUUUUTOOOO
Grazie e saluti
Erman
Edited 1 time(s). Last edit at 09/19/2019 05:12PM by flyover1974.
Sorry, only registered users may post in this forum.