The next meeting is at my house on Saturday 10/25 from 1 til 5 pm.
It is starting a little late for the convenience of Adam Hahn who has his Darwin extruding HDPE reliably in outlines but is having some software trouble with the infills. Hopefully somebody who is good with software (Mark?) can help him out. He says he will try to bring his machine with him so we can all have a look at a working machine. Should be exciting.
Directions to 6 Wade Av:
Take your best route to the 95/695 junction, head west toward Towson. Take the Fredrick Rd (Rt 144) exit (exit 13). Head South back over the bridge, immediately after the bridge and opposite exit ramp is a small brick building, turn left between that building and the large white funeral home. This is Wade Av. 6 is the 3rd house on the right facing the road, a blue house with a white picket fence. Park on the street in front, unless there is a really large funeral going on in which case you have to park way down the street.
