My print bed of Corexy Printer(Hypercube evolution) starts at (70,100,0) but the homing is always at (0,0,0), If I home everything at 0, the sensor doesnot touch the z-axis print bed. I tried the following:
#define X_MIN_POS -70
#define Y_MIN_POS -100
#define Z_MIN_POS 0
I know above code helps when I actually start printing. But how can I do homing at (70,100,0). May be first go to X:0 and then to Y:0, after that the sensor moves to (70,100) and it does the Z:0. Or may be it does the homing at the center of the bed?