Welcome! Log In Create A New Profile

My CoreXY Design

Posted by Taz-dig

Taz-dig

My CoreXY Design
August 09, 2015 09:54PM

Registered: 8 years ago
Posts: 45

I have built a delta machine and did not like the results that I got so I disassembled that machine and started to build a corexy. I really like the design and concept of a corexy machine. Here are some pictures. If all works well, I will upload the files for the machine. I am using the makerslide for the linear rails.

Edited 1 time(s). Last edit at 08/09/2015 09:55PM by Taz-dig.

Reply Quote

Attachments:
open | download - corexy1.jpg (164.4 KB)
open | download - corexy2.jpg (138.4 KB)
open | download - corexy3.jpg (129.6 KB)

Taz-dig

Re: My CoreXY Design
August 24, 2015 08:01PM

Registered: 8 years ago
Posts: 45

Here is a test run with the x and y access
[1drv.ms]

Reply Quote

Velric

Re: My CoreXY Design
October 22, 2015 12:05AM

Registered: 8 years ago
Posts: 17

Hello!, great desing, on the video it shows you are using spectra line but on one of the pictures if shows a motor with a belt pulley, did you change from belts to spectra o from spectra to belts ? Why?

Reply Quote

Taz-dig

Re: My CoreXY Design
October 27, 2015 10:47PM

Registered: 8 years ago
Posts: 45

I went to spectra line instead of the belt. I have both and wanted to try the specra line. I have not put the belt on and have continued to use the specra line. I have been travelling over seas lately and have not been able to be back to the build. From my testing, the specra line will be able to do the speeds that I am hoping for with no worries about slipping. Please let me know if this answers your questions.