Welcome! Log In Create A New Profile

Joining the wooden members of Reprap Rostock

Posted by DennyP

DennyP

Joining the wooden members of Reprap Rostock
June 22, 2014 07:07AM

Registered: 10 years ago
Posts: 50

Hello all!

This is in regards to the Reprap rostock, I've cut out the wooden members but I'm stuck at how to join them.
Based on , they seem cable tied confused smiley

, but how did he achieve the perpendicularity and the rigidity that the image
seems to invoke?
Any experienced builders of the Rostock out there that can share me his/her insight?

Cheers!
DennyP

Reply Quote

DennyP

Re: Joining the wooden members of Reprap Rostock
June 22, 2014 07:07AM

Registered: 10 years ago
Posts: 50

http://reprap.org/wiki/File:Rostock_Motors.jpg

Sorry forgot the link after "Based on"

Reply Quote

sungod3k

Re: Joining the wooden members of Reprap Rostock
June 22, 2014 04:35PM

Registered: 12 years ago
Posts: 805

I'd suggest some normal metal L brackets from the DIY store.

I used lots of them on the wooden frome of my filastruder.

Reply Quote

DennyP

Re: Joining the wooden members of Reprap Rostock
June 23, 2014 07:35AM

Registered: 10 years ago
Posts: 50

Good idea, and if they're fastened with screws only, the wooden members can be removed from one another in case something went wrong

Reply Quote

flyingmoose

Re: Joining the wooden members of Reprap Rostock
June 23, 2014 08:39AM

Registered: 10 years ago
Posts: 8

Hi Danny,
We are going to screw and also glue them. The structure can still be dissembled if needed as the poles are independent from the wood and can be pulled through the printed parts at either end to remove.