Building a printer and need a mentor

I have been working on my printer on and off for over a year. With a break of about 6 months when I started a new job. Now that I have some time I realy want to get the printer working. I am hoping to find someone with some experience that is willing to provide some guidance to help me get over the last few hurdles.

I have the x, y and z axis working (z is calibrated.... maybe). I have been struggling with getting the endstops connected and the the firmware setup correctly. Any help that I can get would be greatly appreciated and I will certainly pass anything I learn along to anyone who needs help.

I have build most of the printer by hand which is why I would like to get at least 1 piece printed.

I am looking forward to hearing from anyone willing to help.

Thanks.... Jeff.



Edited 1 time(s). Last edit at 01/21/2015 06:56PM by jmax.

It may help to say where your located that way you may find someone who is local to you that can help.

Doug

If you can get on IRC, I can help you with the firmware/endstop setup.

---

Please add your printer design to [reprap.org]

Thanks Doug. That does make sense.

Moncton New Brunswick, Canada

Thanks tjb1. I welcome the help.

I have an IRC client installed. it has been quite awhile since I have used irc.

Jeff
jeffrey.maxwell8047@gmail.com