Hi,

I had an old Marlin firmware (uploaded on June 2014) which I decided to upgrade today. I made changes in configuration.h and configuration_adv.h to suit my machine (custom built) and when I uploaded it I got a mintemp error on startup. This, of course, prevents printing as it doesn't allow me to increase the hotend's temperature. The mintemp error is generally generated if there is a problem with the termistor connection, so I have checked if there was a problem but couldn't detect it. I uploaded my old firmware and the error disappeared so it is certainly a configuration problem, but I am not able to find it. Any ideas?

he-he you are lucky, when I restart mine, bed temperature was set to 368.........

Just post your issue in the testers needed section and see if someone found a solution for it, if not just open a new bug fix request.

I spend over 4 hours trying to make my auto bed leveling work and after pulling all the hairs of my head went back to old version.

Edited 1 time(s). Last edit at 04/06/2015 06:01PM by ggherbaz.