Welcome! Log In Create A New Profile


Read current Marlin config

Posted by gatorNic 
Read current Marlin config
June 22, 2015 09:32PM
I have read a lot of uploading new marlin firmware, but they are all opening a file off disk. I would like to see what is currently loaded on the board.

--Is there a way to see the current configuration loaded on the board?

I am not really seeing anything in the Arduino IDE, it all just points to opening files off of disk. thanks
Re: Read current Marlin config
June 22, 2015 11:41PM
You cannot de-compile what is loaded on the board, so the IDE will be of no help. You can see what some of the settings are, though, by just querying the firmware through the pronterface manual interface. First of all, I believe that many parameters are displayed when pronterface first makes a connection. Other that that, check the G code reference here, particularly the M115 command.
Re: Read current Marlin config
June 23, 2015 03:48AM
Ask your reseller of the arduino about their config.h. It´s a good service indicator, too
Sorry, only registered users may post in this forum.

Click here to login