Printing above bed

[youtu.be]

Video of the problem

If it is the z home offset I am not sure how to change

Can you post the begining of the Gcode?

[imgur.com]

Sorry but I can only send a PIC as my broadband is down .

generated by Slic3r 1.1.7 on 2015-08-12 at 14:48:01
; perimeters extrusion width = 0.30mm
; infill extrusion width = 0.37mm
; solid infill extrusion width = 0.37mm
; top infill extrusion width = 0.37mm
; support material extrusion width = 0.30mm
G21 ; set units to millimeters
M107
M190 S103 ; wait for bed temperature to be reached
M104 S226 ; set temperature
G28 ; home all axes
M401
G29 ; z probing
M402
M206 Z-10 ;Z Offset
M109 S226 ; wait for temperature to be reached
G90 ; use absolute coordinates
G92 E0
M82 ; use absolute distances for extrusion
G1 F1800.000 E-1.00000

Remove M206 Z-10; Z offset line and try again