Bootloader on motherboard v1.2 help needed.

for the boot loader, does it need to to be the one that they suggest in the wiki, or could you get by with a [arduino.cc] . Also, when building motherboard, i attached the atx motherboard header, can i use this to power the motherboard, or do i need to remove it and do the modifications on the wiki.

thanks for any help.

... as the mobo is a 'Sanguino' you have to do all steps according to the documentation to copy all neccessary files ... then all selectable programmers can be used.

The hardware-modifications are mostly for driving the mobo with the 5Volts from USB - with the ATX-PS you don't need this modification ...

---

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

Thanks for sawing about the mods, so i will need to buy the sugested bootloader then, thanks.

i have been using bootloader if your still looking for one i can swap..

______________________
business profile

Edited 1 time(s). Last edit at 09/03/2010 08:32AM by gencolour.

just ordered one unfortunatly.

You can actually use the serial cable as a boot loader, without buy a seperate piece of hardware.

[exmrclean.blogspot.com]