Welcome! Log In Create A New Profile

Advanced

Can't import/print OpenJSCAD output for SmartRapCore (hope this is the right board)

Posted by mcm001 
Forum List Message List New Topic
mcm001
Can't import/print OpenJSCAD output for SmartRapCore (hope this is the right board)
February 28, 2017 11:25AM
Hello all,
I am working on building a SmartRapCore. I put in my parameters to OpenJSCAD and generated a printed parts plate, but importing into Tinkercad gives me a mess. (see attached screenshots). What am I doing wrong and how am I supposed to export the plate?
Reply Quote
Attachments:
open | download - Screenshot 2017-02-28 at 8.21.09 AM.png (157.7 KB)
open | download - Screenshot 2017-02-28 at 8.17.59 AM.png (325.2 KB)
Dancer
Re: Can't import/print OpenJSCAD output for SmartRapCore (hope this is the right board)
March 01, 2017 04:13AM
Why do you need to import into Tinkercad?

Would be much more intersting, how it is looking in your slicer.
Reply Quote
mcm001
Re: Can't import/print OpenJSCAD output for SmartRapCore (hope this is the right board)
March 01, 2017 09:45AM
I need to cut the plate into its respective pieces, and I thought tinkercad was the easiest place to do that. Just learned that the openjscad is obsolete, so this is a non-problem.
Reply Quote
Dancer
Re: Can't import/print OpenJSCAD output for SmartRapCore (hope this is the right board)
March 01, 2017 10:47AM
OK

So what slicer are you using? - Most of the Slicers let you split the plate and only print part of it
Reply Quote
mcm001
Re: Can't import/print OpenJSCAD output for SmartRapCore (hope this is the right board)
March 01, 2017 05:32PM
I am using Cura.

EDIT: Works when imported into Curaengine on Octoprint. Huh

Edited 1 time(s). Last edit at 03/01/2017 05:36PM by mcm001.
Reply Quote
Dancer
Re: Can't import/print OpenJSCAD output for SmartRapCore (hope this is the right board)
March 02, 2017 05:19AM
Good to hear!

Happy printing!
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login