Re: P802M Prusa i3 Unofficial Support Thread November 02, 2016 02:26PM |
Registered: 7 years ago Posts: 25 |
Re: P802M Prusa i3 Unofficial Support Thread November 02, 2016 06:52PM |
Registered: 8 years ago Posts: 152 |
Quote
siblues
Here are a couple of pics of that test print you gave me.The print isn't great and I am guessing the skirt at the bottom can be enabled or disabled in Pronterface?The print looks ok to me with some issues with the characters on the ends of the legs.Let me know what you think?I was going to use the factory settings but they had the extruder temp for PLA at 180 so I bumped it to 195 and I just posted three pics so as to not clutter up the thread if the pictures are not allowed let me know and I will edit my post.I am also having some belt issues they seems to stretch quitea bit this last print the belt stretched so much that it was slipping.Are you guys using any belt tensioners or are there any known issues and solutions for that?
Re: P802M Prusa i3 Unofficial Support Thread November 03, 2016 01:08PM |
Registered: 7 years ago Posts: 25 |
Re: P802M Prusa i3 Unofficial Support Thread November 03, 2016 09:45PM |
Registered: 8 years ago Posts: 152 |
Re: P802M Prusa i3 Unofficial Support Thread November 06, 2016 11:03AM |
Registered: 7 years ago Posts: 25 |
Re: P802M Prusa i3 Unofficial Support Thread November 06, 2016 04:25PM |
Registered: 8 years ago Posts: 152 |
Re: P802M Prusa i3 Unofficial Support Thread November 07, 2016 03:09PM |
Registered: 7 years ago Posts: 25 |
Re: P802M Prusa i3 Unofficial Support Thread November 08, 2016 08:27AM |
Registered: 8 years ago Posts: 43 |
Re: P802M Prusa i3 Unofficial Support Thread November 08, 2016 10:12AM |
Registered: 7 years ago Posts: 25 |
Re: P802M Prusa i3 Unofficial Support Thread November 09, 2016 08:06AM |
Registered: 8 years ago Posts: 43 |
Re: P802M Prusa i3 Unofficial Support Thread November 13, 2016 06:15PM |
Registered: 7 years ago Posts: 2 |
Re: P802M Prusa i3 Unofficial Support Thread November 14, 2016 06:33AM |
Registered: 8 years ago Posts: 43 |
Re: P802M Prusa i3 Unofficial Support Thread November 14, 2016 04:01PM |
Registered: 7 years ago Posts: 2 |
Re: P802M Prusa i3 Unofficial Support Thread November 14, 2016 07:11PM |
Registered: 7 years ago Posts: 181 |
Re: P802M Prusa i3 Unofficial Support Thread November 27, 2016 12:03AM |
Registered: 9 years ago Posts: 221 |
Quote
LuckyLoop
hi all,
i have a problem with my P802MA printer.
I tried to upload the firmware to activate the pid-heatbed.
But the printer dont started anymore.
ter with windows via usb (i installed the newest fdi-driver), i see the com-port connection but i cant communicate with the printer trough simplify oder pronterface.
A firmware upload via usb is impossible --> get.sync error.
Have anyone an idea what i can do?
I know my english is horrible, so i am very sorry for it.
Thanks in advance.
Re: P802M Prusa i3 Unofficial Support Thread November 29, 2016 09:08PM |
Registered: 8 years ago Posts: 152 |
Quote
Bobyni
Quote
LuckyLoop
hi all,
i have a problem with my P802MA printer.
I tried to upload the firmware to activate the pid-heatbed.
But the printer dont started anymore.
ter with windows via usb (i installed the newest fdi-driver), i see the com-port connection but i cant communicate with the printer trough simplify oder pronterface.
A firmware upload via usb is impossible --> get.sync error.
Have anyone an idea what i can do?
I know my english is horrible, so i am very sorry for it.
Thanks in advance.
I think that is your problem right there!
It is well known that Chinese board used a lot of " copy"chips of FTDI, consequently the original
Patent company has updated their drivers to block counterfeit one.
Please find yourself an older version of FTDI driver and it should solve your communication issues. Good luck
Re: P802M Prusa i3 Unofficial Support Thread November 30, 2016 09:25PM |
Registered: 7 years ago Posts: 1 |
Re: P802M Prusa i3 Unofficial Support Thread December 01, 2016 08:24PM |
Registered: 7 years ago Posts: 1 |
Re: P802M Prusa i3 Unofficial Support Thread January 01, 2017 09:06AM |
Registered: 8 years ago Posts: 43 |
Re: P802M Prusa i3 Unofficial Support Thread January 03, 2017 06:40AM |
Registered: 7 years ago Posts: 25 |
Re: P802M Prusa i3 Unofficial Support Thread January 03, 2017 05:24PM |
Registered: 7 years ago Posts: 1 |
Re: P802M Prusa i3 Unofficial Support Thread January 05, 2017 10:11AM |
Registered: 8 years ago Posts: 43 |
Re: P802M Prusa i3 Unofficial Support Thread January 08, 2017 12:57AM |
Registered: 7 years ago Posts: 3 |
Re: P802M Prusa i3 Unofficial Support Thread January 08, 2017 07:24AM |
Registered: 7 years ago Posts: 181 |
Re: P802M Prusa i3 Unofficial Support Thread January 08, 2017 12:46PM |
Registered: 7 years ago Posts: 3 |
Re: P802M Prusa i3 Unofficial Support Thread January 08, 2017 04:03PM |
Registered: 7 years ago Posts: 181 |
Re: P802M Prusa i3 Unofficial Support Thread January 08, 2017 07:25PM |
Registered: 7 years ago Posts: 3 |
Re: P802M Prusa i3 Unofficial Support Thread January 15, 2017 04:16AM |
Registered: 7 years ago Posts: 1 |
Re: P802M Prusa i3 Unofficial Support Thread January 20, 2017 05:42PM |
Registered: 7 years ago Posts: 1 |
Re: P802M Prusa i3 Unofficial Support Thread January 27, 2017 09:23PM |
Registered: 9 years ago Posts: 221 |