Welcome! Log In Create A New Profile


MKS Gen V 1,4

Posted by Peterchen 
MKS Gen V 1,4
December 22, 2016 10:13AM
As i have said already i bought a TEVO Black widow printer. On the board is written: MKS Gen V 1,4 .I have Printrun and Cura.
The problem is : after i adjusted it and go to Cura ( i loaded a testcube from Thingiverse) but it will not connect to the printer.
What could i do?
Thank you for your help!
Re: MKS Gen V 1,4
January 04, 2017 09:20PM
have you installed the usb drivers and verified this in device manager assuming your using windows they are separate from the printer program and need to be done first regardless of firmware on the board
Re: MKS Gen V 1,4
January 09, 2017 12:05PM
Thank you for answering.Short after i wrote D3 and D4 and D11 began to give a greenblue light and the part on which is the number 220 began to get so hot that its isolation lacqer began to stink breathtaking but in spite of this the screen was showing :Black Widow ready.
Because i thought that the two diodes and the coil are not working any more i ordered a new board and am now waiting for its arrival.
Re: MKS Gen V 1,4
January 09, 2017 12:25PM

Edited 1 time(s). Last edit at 01/09/2017 12:25PM by obewan.
Sorry, only registered users may post in this forum.

Click here to login