Welcome! Log In Create A New Profile

Help again

Posted by Bee69

Bee69

Help again
September 16, 2017 12:33PM

Registered: 7 years ago
Posts: 163

Hi guys im in trouble again.

[drive.google.com]

[drive.google.com]

I switched the printer on yesterday and I'm a new one.(for me)
The mess on the bed is me trying to sort it out.
I've tried differant nozle temps and bed temps
Thanks

Reply Quote

David J

Re: Help again
September 17, 2017 09:15AM

Registered: 9 years ago
Posts: 893

Looks like too much plastic is being pushed out. Have you calibrated the extruder?

Reply Quote

Bee69

Re: Help again
September 17, 2017 09:54AM

Registered: 7 years ago
Posts: 163

Hi
Thanks for the reply.
I calibrated the extruder a while ago and not changed a thing since. I switched the printer on two days ago and I'm as seen in the clips
I've tried different nozzle temps and bed temps and I'm stumped I've looked ar different web sites and none look like my problem.

Reply Quote

Soadyheid

Re: Help again
September 28, 2017 08:51PM

Registered: 7 years ago
Posts: 27

The nearest thing I can find is Inconsistent extrusion, check out the link and see what you think. Possibly some sort of clogging of the nozzle? Try manually cleaning it out with a cleaning pin if you have one.

My two cents...

Play Bonny

Soadyheid

Reply Quote

Dancer

Re: Help again
September 29, 2017 10:20AM

Registered: 7 years ago
Posts: 154

Distance between Nozzle and Printplate to big, thus first layer not adhering to your blue painters tape.

Reply Quote

Bee69

Re: Help again
October 05, 2017 03:50AM

Registered: 7 years ago
Posts: 163

Thanks for the advice guys it was a bit of a nightmare. So I started fresh and re-did everything and its working ok now.
Thanks
Adrian