Fisher build - jumper cord?

luciam

Fisher build - jumper cord?
August 27, 2015 06:00AM

Registered: 8 years ago
Posts: 5

Hi all

Just wondering if anyone could help me out with the Fisher build. One of the final steps says "Fit the jumper onto the 5V_EN (JP9) header pins as shown." but the picture doesn't really show anything and I have no idea where to attach this! (see the link here https://reprappro.com/documentation/fisher-beta/electronics/#Jumper]

Also do you find that you needed to solder the connection between endstop looms to the microswitches? Mine keep coming loose?

I'm pretty new to this space, so thanks a lot for your help!

Reply Quote

bgkdavis

Re: Fisher build - jumper cord?
August 27, 2015 06:05AM

Registered: 8 years ago
Posts: 443

yes soldering is highly recommended

look closely at the board there are only a few jumpers and the one you need is clearly marked 5V_EN

btw the jumper isnt a cord its a little black plastic square that fits over pins and is really easy to lose

Edited 2 time(s). Last edit at 08/27/2015 06:07AM by bgkdavis.

RepRapPro Mendel 3 Tricolour
RepRapPro Fisher
-Carbon Arms
-Easy adjust Carriage+effector
-axis stiffness mods
HE3D -600 delta
-Duet 0.8.5
-PanelDue
-DC42 Height probe
-RobotDigg metal components
Simplyfy3D
RS Design Spark CAD

Reply Quote

luciam

Re: Fisher build - jumper cord?
August 27, 2015 12:03PM

Registered: 8 years ago
Posts: 5

Thanks a lot! smiling smiley

Manage to find the part - I had been getting it confused with this cord (see pic attached). No idea where this should be fitted though? I can't seem to find it in any of the documentation - any ideas?!

Reply Quote

Attachments:
open | download - image1 (2).JPG (32 KB)

luciam

Re: Fisher build - jumper cord?
August 27, 2015 12:04PM

Registered: 8 years ago
Posts: 5

*where this cord should be fitted!

Reply Quote

Greg_be

Re: Fisher build - jumper cord?
August 27, 2015 12:29PM

Registered: 8 years ago
Posts: 83

Don't have anything like this in my kit, sorry

Reply Quote

dougal1957

Re: Fisher build - jumper cord?
August 27, 2015 01:22PM

Registered: 9 years ago
Posts: 1,159

Quote
luciam
Thanks a lot! Manage to find the part - I had been getting it confused with this cord (see pic attached). No idea where this should be fitted though? I can't seem to find it in any of the documentation - any ideas?!

Tha actually looks more like a Thermocouple probe of a multimeter.

Reply Quote

rogerdiver

Re: Fisher build - jumper cord?
August 27, 2015 03:20PM

Registered: 8 years ago
Posts: 13

Not a Fisher part! Thats a thermocouple lead for a meter.
regards

Reply Quote

bgkdavis

Re: Fisher build - jumper cord?
August 27, 2015 04:09PM

Registered: 8 years ago
Posts: 443

Lol someone at RRP has been looking for that smiling smiley

Edited 1 time(s). Last edit at 08/27/2015 07:48PM by bgkdavis.

RepRapPro Mendel 3 Tricolour
RepRapPro Fisher
-Carbon Arms
-Easy adjust Carriage+effector
-axis stiffness mods
HE3D -600 delta
-Duet 0.8.5
-PanelDue
-DC42 Height probe
-RobotDigg metal components
Simplyfy3D
RS Design Spark CAD

Reply Quote

luciam

Re: Fisher build - jumper cord?
August 28, 2015 12:17PM

Registered: 8 years ago
Posts: 5

Oh right haha! Thanks for clearing that up!

Reply Quote