Welcome! Log In Create A New Profile


Fisher Rod DXF download - [FOUND]

Posted by ByteSlinger 
Fisher Rod DXF download - [FOUND]
January 12, 2016 07:04PM
HI all,

I'm trying to find the file for this to be made and really struggling.
Can anyone help? Or recommend a good alternative?



Here's the file: https://raw.githubusercontent.com/reprappro/Fisher/3763feae76a749156fb1b7430c6995d73042990d/dxf/1195%20-%2002.DXF

Edited 1 time(s). Last edit at 01/12/2016 07:13PM by ByteSlinger.
Re: Fisher Rod DXF download - [FOUND]
January 13, 2016 09:39PM
Here are printed arms (with M3 rods)
They work well, are slightly lighter than the original, 'pops' out in case of mechanical problems, but you need to be able to print.
Mine are in PETG, I made a special version for PLA (as PLA is twice the stifness of PETG), was tested ok by someone else.
Re: Fisher Rod DXF download - [FOUND]
January 13, 2016 09:43PM
Ah, and I forgot, as PETG is chemically pretty neutral, you can use any lubricant without fear of destroying the plastic, no need for special plastic lubricant.

However printed parts tend to absorb lubricant, so a dry lubricant is better.
Sorry, only registered users may post in this forum.

Click here to login