The LCD uses M428, which can't be used more than 2cm away from 0 or an endstop.
Look into your configuration.h
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
#define Y_MIN_POS 0
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
Edited 1 time(s). Last edit at 10/22/2019 05:13AM by Dust.