I have up-loaded the newest Marlin 1.1.0 RC5 software with activated the "Mesh_bed_leveling " and "Man_bed_leveling " in the configuration.h file.
When i uploaded it with Arduino IDE_nightly (= 1.6.8 with bugs solved , there is a communication problem within 1.6.8 ) , i can give a command G29 S1 ( = mesh bed leveling ) from Repetier Host and it is working after i give a M420 S1 ( = bed level activated) , but it is not working from the LCD display when i give the command from "Prepare " -> "Bed level", the print command from SD card is working well .
When i use the Arduino IDE 1.0.6 and uploaded the RC5 , the mesch bed leveling is working from the LCD but i can not print from the LCD.
What is wrong , still bugs in the RC5 with the Arduino 1.6.8 ?