I'm getting the following errors on compile:

In file included from C:\Users\Sheldon\AppData\Local\Temp\build72fb746c43f86b73beb33336246c8db4.tmp\sketch\SdFile.h:27:0,

from C:\Users\Sheldon\AppData\Local\Temp\build72fb746c43f86b73beb33336246c8db4.tmp\sketch\cardreader.h:6,

from C:\Users\Sheldon\AppData\Local\Temp\build72fb746c43f86b73beb33336246c8db4.tmp\sketch\Marlin_main.cpp:37:

SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'

struct fpos_t {

^

In file included from C:\Users\Sheldon\AppData\Local\Temp\build72fb746c43f86b73beb33336246c8db4.tmp\sketch\Marlin.h:10:0,

from C:\Users\Sheldon\AppData\Local\Temp\build72fb746c43f86b73beb33336246c8db4.tmp\sketch\Marlin_main.cpp:30:

c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

__extension__ typedef long long fpos_t;

^

Using library LiquidCrystal at version 1.0.5 in folder: C:\Program Files (x86)\Arduino\libraries\LiquidCrystal
exit status 1
using typedef-name 'fpos_t' after 'struct'


Any ideas?

Solved. Found another thread. Ended up ha ing to install 1.0.6

hi
I have the same problem ( using typedef-name 'fpos_t' after 'struct' ) how to solve ?

Exactly the issues I'm having. and I can't seem to find an earlier version of the arduino ide to go back to.

Version 1.0.6 works perfectly on Windows 10

Arduino 1.0.6

Or download the latest version of Marlin. RC or RCBugFix.

Or, if you can't for some reason, rename fpos_t to filepos_t:

/Marlin/Marlin/SdBaseFile.cpp:
  301  }
  302  //------------------------------------------------------------------------------
  303: void SdBaseFile::getpos(filepos_t* pos) {
  304    pos->position = curPosition_;
  305    pos->cluster = curCluster_;
  ...
  933   */
  934  int SdBaseFile::peek() {
  935:   filepos_t pos;
  936    getpos(&pos);
  937    int c = read();
  ...
 1488  }
 1489  //------------------------------------------------------------------------------
 1490: void SdBaseFile::setpos(filepos_t* pos) {
 1491    curPosition_ = pos->position;
 1492    curCluster_ = pos->cluster;

/Marlin/Marlin/SdBaseFile.h:
   41  //------------------------------------------------------------------------------
   42  /**
   43:  * \struct filepos_t
   44   * \brief internal type for istream
   45   * do not use in user apps
   46   */
   47: struct filepos_t {
   48    /** stream position */
   49    uint32_t position;
   50    /** cluster for position */
   51    uint32_t cluster;
   52:   filepos_t() : position(0), cluster(0) {}
   53  };
   54  
   ..
  206     * \param[out] pos struct to receive position
  207     */
  208:   void getpos(filepos_t* pos);
  209    /** set position for streams
  210     * \param[out] pos struct with value for new position
  211     */
  212:   void setpos(filepos_t* pos);
  213    //----------------------------------------------------------------------------
  214    bool close();

Edited 1 time(s). Last edit at 09/13/2016 04:15PM by Wurstnase.

---

Triffid Hunter's Calibration Guide

--> X <-- Drill for new Monitor

Most important Gcode.

Thanks downloaded and installed. Can't fully test as I now have an electrical/electronics fault that's going to take a couple of days to fix, whilst I wait for some spares.