I'm having a hard time understanding which corner is my home corner on the Autoleveling printout (from G29). Is my home 0,0 or 2,2?
See attached image.

0,0 is home coordinates(front left of the bed) that have a measured Z offset of -0.011 with X across the top and Y down the left

Edited 2 time(s). Last edit at 02/04/2019 09:43AM by obewan.

Quote
obewan
0,0 is home coordinates(front left of the bed) that have a measured Z offset of -0.011 with X across the top and Y down the left

Thank you.