... you can define different tools with different "pulses per mm" ratio, what could be a methode to control different tools with specific PWM ratios (or step-rates).
When configuring/using more different tools, I've configured one for a paste-jetter, the other for an UV-curing lamp (both with different Pulseratio/PWM) and the third without PWM for a camera -- this would be the same for CNC and/or laser.
Another point is correct offset-definition and programmatic tool-changig with this offsets -- for this I've modified Pronterface and added different "tool-boxes" for the specific toolheads ... but this is not part of the OpenSource programming, so can't disclosure or give more detailed infos
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [
reprap.org] -- Deutsche Facebook-Gruppe - [
www.facebook.com]
Call for the project "garbage-free seas" - [
reprap.org]