G29 Auto bed leveling extreme squish February 14, 2021 08:45AM |
Registered: 4 years ago Posts: 55 |
Loaded /Users/k/Desktop/PI3MK3M_xyzCalibration_cube.gcode, 12834 lines 1.33m of filament used in this print The print goes: - from 92.70 mm to 112.30 mm in X and is 19.60 mm wide - from 107.70 mm to 127.30 mm in Y and is 19.60 mm deep - from 0.00 mm to 20.00 mm in Z and is 20.00 mm high Estimated duration: 100 layers, 0:16:02 Print started at: 20:54:48 Selected home phase 896 too close to endstop trigger phase 952. Pick a different phase for 89 Preheating Wait for bed heating... Wait for bed heating... Wait for bed heating... Bilinear Leveling Grid: 0 1 2 0 +3.705 +3.425 +3.560 1 +3.307 +3.450 +3.557 2 +3.305 +3.397 +3.425 start
echo:; Z-Probe Offset (mm): echo: M851 X55.00 Y19.00 Z-0.60
#define NOZZLE_TO_PROBE_OFFSET { 55, 19, -1.11 }
Re: G29 Auto bed leveling extreme squish February 14, 2021 10:27AM |
Registered: 4 years ago Posts: 55 |
#define Z_MAX_POS 255 // was 259
>>> g29 SENDING:G29 Preheating hotend (120) and bed (50) Wait for bed heating... Bilinear Leveling Grid: 0 1 2 0 +0.267 +0.077 +0.217 1 -0.108 +0.102 +0.237 2 -0.100 +0.060 +0.132 echo:busy: paused for user
Re: G29 Auto bed leveling extreme squish February 14, 2021 11:04AM |
Registered: 4 years ago Posts: 55 |