Full Graphic Smart Controller - Button doesn't do anything
Posted by InitialDima
|
Full Graphic Smart Controller - Button doesn't do anything November 16, 2024 06:58AM |
Registered: 2 months ago Posts: 5 |
I have Marlin 2.1.2.4 on Ramps 1.4. I've uncommented stroke "#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER", I can see informational page on LCD, but can't get into menu, becuase button doesn't do anything. If I rotate encoder, FR percentage changes, but presses aren't seen by Marlin. Tried to connect another Full Graphic Smart Cotroller, but the problem saved. Can anyone help me? What can I do to fix my problem?
P.s.: sorry for my bad english
P.s.: sorry for my bad english
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 16, 2024 09:38PM |
Admin Registered: 14 years ago Posts: 7,168 |
You should use Platformio under vscode, its is 100x faster to build and uses correct libraries automatically. [marlinfw.org]
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 16, 2024 09:46PM |
Admin Registered: 14 years ago Posts: 7,168 |
I cannot replicate this issue using arduino ide or platformio.
Best guess, you have defined something else to use the encoder pin 35 or its a hardware fault.
Test your hardware with [github.com]
Best guess, you have defined something else to use the encoder pin 35 or its a hardware fault.
Test your hardware with [github.com]
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 02:49AM |
Registered: 2 months ago Posts: 5 |
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 03:28AM |
Admin Registered: 14 years ago Posts: 7,168 |
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 03:40AM |
Registered: 2 months ago Posts: 5 |
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 03:53AM |
Admin Registered: 14 years ago Posts: 7,168 |
These lines are wrong
it should be
this stops the hundreds of "Marlin/src/module/../inc/../../Configuration.h:321:1: warning: "/*" within comment [-Wcomment]"
but doesn't make any difference to your issue.
Using your configs on my hardware. works as expected, not that I can read ru, but it shows the ru menus on encoder push.
/*#define SWITCHING_TOOLHEAD /*#define MAGNETIC_SWITCHING_TOOLHEAD
it should be
//#define SWITCHING_TOOLHEAD //#define MAGNETIC_SWITCHING_TOOLHEAD
this stops the hundreds of "Marlin/src/module/../inc/../../Configuration.h:321:1: warning: "/*" within comment [-Wcomment]"
but doesn't make any difference to your issue.
Using your configs on my hardware. works as expected, not that I can read ru, but it shows the ru menus on encoder push.
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 04:20AM |
Admin Registered: 14 years ago Posts: 7,168 |
Try this
In file Marlin/src/pins/ramps/pins_RAMPS.h is
change it to
see if that changes anything for you.
Edited 1 time(s). Last edit at 11/17/2024 04:21AM by Dust.
In file Marlin/src/pins/ramps/pins_RAMPS.h is
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
change it to
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
//#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
see if that changes anything for you.
Edited 1 time(s). Last edit at 11/17/2024 04:21AM by Dust.
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 08:00AM |
Registered: 2 months ago Posts: 5 |
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 09:10AM |
Admin Registered: 14 years ago Posts: 7,168 |
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 17, 2024 09:17AM |
Registered: 2 months ago Posts: 5 |
|
Re: Full Graphic Smart Controller - Button doesn't do anything November 23, 2024 09:57AM |
Registered: 4 years ago Posts: 31 |
I have the same controller and it works.
The only dif I can find relative to pins is I have DIRECT_PIN_CONTROL enabled - around line 4250 in _AVD
I have no idea if this is needed for you, but it seems to be only for M42 and M226 code.
Other than that, have you got all the libraries?
If so, and you enable above, then it must be a hw failure.
The only dif I can find relative to pins is I have DIRECT_PIN_CONTROL enabled - around line 4250 in _AVD
I have no idea if this is needed for you, but it seems to be only for M42 and M226 code.
Other than that, have you got all the libraries?
If so, and you enable above, then it must be a hw failure.
Sorry, only registered users may post in this forum.