DuetWiFi case

Hi,
Has anybody got an openscad design for the duet wifi?
The reason I would like openscad is so that it can be modified to take the deuex5 board as well.

Just looking for shortcuts to print a case so any help would be very appreciated

I will ask this on the wifi forum as well.

---

appjaws - Core XYUV Duet Ethernet Duex5
firmware 3.1.1 Web Interface 3.1.1
Ormerod 1-converted to laser engraver, Duet wifi
OpenSCAD version 2020.07
slic3r-1.3.0, Simplify3D 4.1.2, Cura-4.4.1

Posted my reply on the duet wifi forum but if anyone else is interested, I put mine on thingiverse - here you go [www.thingiverse.com]

Thanks for that, looks good

---

appjaws - Core XYUV Duet Ethernet Duex5
firmware 3.1.1 Web Interface 3.1.1
Ormerod 1-converted to laser engraver, Duet wifi
OpenSCAD version 2020.07
slic3r-1.3.0, Simplify3D 4.1.2, Cura-4.4.1

Just made a modified version that will take the Duex expansion board as well. Not back to back, but rather as if they had been mounted back to back, joined at the Vin terminals then opened out like a book. IMO it'll make access to all the connectors easy and also always for two cooling fans to blow on the back of the boards. (not that it should be necessary though).The downside is, you'll need a biggish bed to print it as it's 290mm long. If that's too big but you still want to mount the boards that way, you can always make two of my other design and fit them so that they touch, because the expansion board is the same size as the Duet.. The OpenScad file is here too so anyone can tweak it to suit. [www.thingiverse.com] HTH

Just amended the Duetwifi and duex2/5 enclosure on thingiverse -- [www.thingiverse.com]
This has fixed a few problems and offers more choices in the scad file i.e.
Duetwifi no fan
Duetwifi 40/50/60/80 external fan mount
Duetwifi 40/50/60/80 internal fan mount
Duetwifi and duex2/5 no fan
Duetwifi and duex2/5 40/50/60/80 external fan mount
Duetwifi and duex2/5 40/50/60/80 internal fan mount
fan guard 40/50/60/ fan widths

select printbox to print enclosure
select printlid to print main enclosure lid
select printlidx5 to print lid for duex5 board
select printguard to true to print grill
select nuttrap for the grill to have nut traps or round head bolts
select expcon to include access to the expansion connector of the duetwifi board

select hardware to view boards and fans in position
select assembled to view the complete enclosure with lid/s

---

appjaws - Core XYUV Duet Ethernet Duex5
firmware 3.1.1 Web Interface 3.1.1
Ormerod 1-converted to laser engraver, Duet wifi
OpenSCAD version 2020.07
slic3r-1.3.0, Simplify3D 4.1.2, Cura-4.4.1