Minor firmware release 1.17c January 14, 2017 03:03PM |
Registered: 10 years ago Posts: 14,672 |
Re: Minor firmware release 1.17c January 14, 2017 04:43PM |
Registered: 8 years ago Posts: 117 |
Re: Minor firmware release 1.17c January 16, 2017 11:36AM |
Registered: 7 years ago Posts: 558 |
Quote
dc42
- G30 with no parameters now sets the machine position to the Z probe trigger height instead of the user position. This means that running G28 (home) and G29 (bed probe) alternately no longer causes the bed height map to creep up or down in average height when Z homing uses the Z probe. However, it means that the Z height displayed after a G30 command is no longer always the same as the Z probe trigger height.
Re: Minor firmware release 1.17c January 16, 2017 01:34PM |
Registered: 10 years ago Posts: 14,672 |
Quote
PDBeal
Quote
dc42
- G30 with no parameters now sets the machine position to the Z probe trigger height instead of the user position. This means that running G28 (home) and G29 (bed probe) alternately no longer causes the bed height map to creep up or down in average height when Z homing uses the Z probe. However, it means that the Z height displayed after a G30 command is no longer always the same as the Z probe trigger height.
Are you saying that a G92 Z0, with a subsequent G30 S-1 will no longer report trigger height?
Re: Minor firmware release 1.17c January 17, 2017 06:13AM |
Registered: 8 years ago Posts: 117 |
Re: Minor firmware release 1.17c January 17, 2017 08:31AM |
Registered: 9 years ago Posts: 893 |
Re: Minor firmware release 1.17c January 24, 2017 10:17PM |
Registered: 9 years ago Posts: 71 |
Re: Minor firmware release 1.17c January 25, 2017 03:18AM |
Registered: 10 years ago Posts: 14,672 |