Welcome! Log In Create A New Profile

Advanced

Sneak peek on the Bloft MK2 3D-printer

Posted by atmark 
Sneak peek on the Bloft MK2 3D-printer
July 15, 2020 03:49PM
Hey

I'm happy to give you a first peek on our printer that we are currently building. The Bloft MK2 is based on Tobben's HP4 which we will extend with moving ABC-anchorpoints. We will have a modular frame based on stage trusses. The ABC-anchor's will glide on those trusses in the Z-axis. That will enable a cylindrical print volume making it more useable for tall objects.

Total height of the frame will be 4.5 m
Footprint diameter of approx. 4 m
We will have to see where the max. print height will settle in, but we're aiming for 3-3.5 m, which would equal to 2.5-2.8 m3 print volume.

The frame will be made of aluminium trusses and steel corners. The end effector is made of bend 1.5 mm sheet metal to achieve a good mix of (relative) lightness and sturdy structure. On the end effector we will attach the Badass Pellet Extruder with currently 1.5 kg/h output. Our goal is to print shredded waste plastic.

Hopefully, we can fire up the beast in august/september. More to follow.




portfolio // project gallery // instagram
Re: Sneak peek on the Bloft MK2 3D-printer
July 23, 2020 03:40PM
Nice project!

I'll be waiting for the followup grinning smiley
Re: Sneak peek on the Bloft MK2 3D-printer
July 24, 2020 03:42PM
We reached today a big milestone!
Finally the frame is standing on its feet.
In the coming weeks, we will be adding hardware to the frame and eventually start testing the electronics and firmware.




portfolio // project gallery // instagram
VDX
Re: Sneak peek on the Bloft MK2 3D-printer
July 24, 2020 04:08PM
smileys with beer


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Sorry, only registered users may post in this forum.

Click here to login